FAuDE Tec ProSuit FLEX - the flexible UR robot protective cover Alternatives & Competitors

A one-piece robot protective cover with thermally welded seams. The ProSuit ONE protection is extremely tear- and wear-resistant and is ideal for protecting UR gears in the ceramic processing industry, for painting applications and for drilling emulsions in machining centers.

Technical specifications:

Coating / fabric: PU coated polyester

Electrical surface resistance: 1.45.10 (+14) ohms

Paint compatibility: 1 (silicone-free)

Temperature resistance: – 20 ° C to + 60 ° C

Cleaning: 60 ° C

Color: light gray

Including a fastening set for fixing the protective jacket on the robot. Consists of: self-adhesive hook tape and cable ties

The one-sided PU film laminated polyester robot protective cover of the ProSuit F&P is suitable for UR applications in food processing, in clean rooms and in the pharmaceutical industry. The high-pressure-resistant, dirt-repellent, easy-to-clean material is resistant to commonly used cleaning agents and boiling water resistant up to 75 ° C.

The protective cover complies with the FDA 21 CFR chap. 1, EGV 1935/04 and meets the standard IP 67 requirements.

Technical specifications:

Coating / fabric: one-sided PU film laminated polyester

Paint compatibility: 1 (silicone-free)

Temperature resistance: up to + 100 ° C

Cleaning: resistant to boiling water at 75 ° C

Color: white or blue

(Please specify when ordering)

The Robo-Gear protective cover is designed to protect against paint, liquid splashes, dust and dirt. The robot is protected from axis 1-6 and can move completely. It is available in different sizes – Customized for your Universal Robot.

The Robosuit® is a protective cover for the full range of UR arms. The UR5 Robosuit ® consists of nine suit components: a base skirt, base cover, lower arm, shoulder, upper arm, wrist, and three ring-retainers. Components interlock/join via either PVC rings or simple cuff-overlaps. Velcro seams are featured unless otherwise specified.

The e-series version of the Robosuit ® includes four additional components: a J6 seal, and three additional ring-retainers. Each cover is custom-manufactured to your specific application and need and will protect your UR robot from extremes in temperature, sharp metal turnings, cutting fluids and coolants, and particulate (grit, dust, and debris).

FEATURES:

12OZ 1000-Denier nylon UR5 Robosuit ®:

Excellent general use material for basic protection from dust, dirt, and large grit
Not suited for use in wet applications as the material is breathable
Very low level of abrasion resistance
Wide range of colour choices available
Available in e-series and CB


18OZ Fire-retardant PVC vinyl UR5 Robosuit ®:

Excellent general use material for most water-soluble coolants and cutting fluids, fine mesh grits dust and powders, de-ionized water, and limited protection from pressurized water spray/mist
Very low level of chemical and abrasion resistance
Wide range of colour choices available
Available in e-series and CB


17OZ Hypalon ® impregnated vinyl UR5 Robosuit®:

Excellent material for use in high-abrasion environments as well as metal chips (de-burr/cutting)
Provides limited levels of protection from water spray/ mist while offering good levels of chemical resistance
Limited range of colour choices available
Available in e-series and CB


Aluminum coated Kevlar ® UR5 Robosuit ®:

Excellent material for use in high and low heat environments, light sparks and for UV protection
Nominal insulating factor of R-0.7
Maximum radiant operating temperature of 1250F. Minimum operating temperature -65F
Sliver in colour
Available in e-series and CB


10-Mil laminated Teflon® UR5 Robosuit ®:

Excellent protection in (caustic) chemical environments
FDA approved option, however, that does not equate to the Robosuit ® being FDA-approved
Maximum radiant operating temperature of 650F
Grey in colour
Available in e-series and CB


Isotherm ® weld splatter UR5 Robosuit ®:

Excellent material for use in low-inertia weld splatter and heavy spark applications
Maximum sustain (radiant) operating temperature of 500F. Short-term exposure to 700F
Grey in colour
Available in e-series and CB

The EasyRobotics ProFeeder Flex is the newest member of the ProFeeder family (a family of more than 500 units around the world!). The ProFeeder Flex is a robot cell that is designed to make manufacturing fast, more efficient, and above all, more flexible. It is a highly compact, adaptable, and maneuveurable machine tending system and has broad compatability with leading cobot brands. Those brands include Universal Robots, Kassow Robots, Doosan Robotics, Hanwha, AUBO Robotics, FANUC and many more.

EasyRobotics, the manufacturer of the PreFeeder Flex, is a pioneer in the field of robotic machine tending. They have been designing innovative products that help manufacturers increase output and decrease costs, overhead, and downtime. The all-new ProFeeder Flex is one of their latest creations, and is designed to provide manufacturers unparalleled flexibility. With built-in, heavy-duty wheels, the ProFeeder Flex is designed to be easy to move an maneuverable as possible.

It’s all about putting the Manufacturers can select the ProFeeder Flex as per their requirement from three distinguishing models:

1. FlexBase – ProFeeder Flex equipped with compartment for controller and pedestal
2. FlexOne – ProFeeder Flex with one table
3. FlexThree – ProFeeder Flex three tables

The ProFeeder Flex was designed using state-of-the art technology and buil with top-of-the-line materials. The cobot is centrally installed to maximize access to the tables and the surrounding area. The ProFeeder Flex also includes a place to mount the teach pendant and provides plenty of space in the compartment below to store the controller.

All cables and wires are hidden and kept out of the way. This way there is a much lower risk of an acccident occurring because of them or damage occurring to them. The controller and robot unit can be accessed through RJ45 after the installation process.