FAuDE Tec ProSuit ONE- the robust one-piece UR robot protective suit Alternatives & Competitors

The three-part ProSuit FLEX robot protective cover offers great flexibility in robot positions thanks to the highly elastic, coated polyester and the multi-part design. The robot protective jacket is extremely tear and wear-resistant and is suitable for protecting the UR robot gears in the ceramic processing industry, in painting applications and in machining centers when the requirement for a large work area and complex robot poses or maximum possible freedom of movement of the robot is required.

Technical specifications:

Coating / fabric: PU coated polyester

Electrical surface resistance: 1.45.10 (+14) ohms

Paint compatibility: 1 (silicone-free)

Temperature resistance: – 20 ° C to + 60 ° C

Cleaning: 60 ° C

Color: light gray

Including fastening set for fixing the protective jacket on the robot. Consists of: self-adhesive hook tape and cable ties

The one-sided PU film laminated polyester robot protective cover of the ProSuit F&P is suitable for UR applications in food processing, in clean rooms and in the pharmaceutical industry. The high-pressure-resistant, dirt-repellent, easy-to-clean material is resistant to commonly used cleaning agents and boiling water resistant up to 75 ° C.

The protective cover complies with the FDA 21 CFR chap. 1, EGV 1935/04 and meets the standard IP 67 requirements.

Technical specifications:

Coating / fabric: one-sided PU film laminated polyester

Paint compatibility: 1 (silicone-free)

Temperature resistance: up to + 100 ° C

Cleaning: resistant to boiling water at 75 ° C

Color: white or blue

(Please specify when ordering)

The Robo-Gear protective cover is designed to protect against paint, liquid splashes, dust and dirt. The robot is protected from axis 1-6 and can move completely. It is available in different sizes – Customized for your Universal Robot.

The Robosuit® is a protective cover for the full range of UR arms. The UR5 Robosuit ® consists of nine suit components: a base skirt, base cover, lower arm, shoulder, upper arm, wrist, and three ring-retainers. Components interlock/join via either PVC rings or simple cuff-overlaps. Velcro seams are featured unless otherwise specified.

The e-series version of the Robosuit ® includes four additional components: a J6 seal, and three additional ring-retainers. Each cover is custom-manufactured to your specific application and need and will protect your UR robot from extremes in temperature, sharp metal turnings, cutting fluids and coolants, and particulate (grit, dust, and debris).

FEATURES:

12OZ 1000-Denier nylon UR5 Robosuit ®:

Excellent general use material for basic protection from dust, dirt, and large grit
Not suited for use in wet applications as the material is breathable
Very low level of abrasion resistance
Wide range of colour choices available
Available in e-series and CB


18OZ Fire-retardant PVC vinyl UR5 Robosuit ®:

Excellent general use material for most water-soluble coolants and cutting fluids, fine mesh grits dust and powders, de-ionized water, and limited protection from pressurized water spray/mist
Very low level of chemical and abrasion resistance
Wide range of colour choices available
Available in e-series and CB


17OZ Hypalon ® impregnated vinyl UR5 Robosuit®:

Excellent material for use in high-abrasion environments as well as metal chips (de-burr/cutting)
Provides limited levels of protection from water spray/ mist while offering good levels of chemical resistance
Limited range of colour choices available
Available in e-series and CB


Aluminum coated Kevlar ® UR5 Robosuit ®:

Excellent material for use in high and low heat environments, light sparks and for UV protection
Nominal insulating factor of R-0.7
Maximum radiant operating temperature of 1250F. Minimum operating temperature -65F
Sliver in colour
Available in e-series and CB


10-Mil laminated Teflon® UR5 Robosuit ®:

Excellent protection in (caustic) chemical environments
FDA approved option, however, that does not equate to the Robosuit ® being FDA-approved
Maximum radiant operating temperature of 650F
Grey in colour
Available in e-series and CB


Isotherm ® weld splatter UR5 Robosuit ®:

Excellent material for use in low-inertia weld splatter and heavy spark applications
Maximum sustain (radiant) operating temperature of 500F. Short-term exposure to 700F
Grey in colour
Available in e-series and CB

Welded and bolted steel construction with lower shelf for control box mounting and mounting bracket for UR pendant. Includes locking casters.

Description: Welded and bolted steel construction with lower shelf for control box mounting and mounting bracket for UR pendant. Includes locking casters.