DESTACO AUTOMATIC TOOL CHANGERS – RHC SERIES Alternatives & Competitors

The Millibar Manual Tool Changer allows operators to effortlessly change tools for high mix, low volume production applications.

Without any tools, quickly switch between adaptive grippers, vacuum grippers, camera calibration stylus, and more. Simply release the locking lever and slide a new tool into place.

Even if your facility has a variety of robot brands, the Millibar Manual Tool Changer ecosystem allows tools to be moved between robots.

Payload Line-up : 80kg/120kg/180kg/300kg.
Applicable to ISO Mounting Pattern.

Super-Thin

Clamped state dimension　
SWL0800：53mm SWL1200：62mm　SWL1800：70mm　SWL3000：83mm

Direct Mounting on Robots

Applicable to ISO Mounting Pattern.

Fall Prevention
Mechanically holds connection even when air pressure is at 0MPa.

The MGW Connector is our universal quick changer for every application and we have made it even better! The new system is of higher quality and offers more safety and accuracy. The innovations are a response to the current requirements of our customers. A centering disc can be installed on both the upper assembly (robot side) and lower assembly (tool side) of the robot and ensures that the tools are correctly aligned with the robot arm.

MGW Connector advantages:

• Interface according to DIN EN ISO 9409-1
• Durable - 5,000/10,000 cycles*
• Withstands high loads
• No tool required due to integrated operating lever
• Intuitive operation
• Can be released and closed with one hand
• Protection against unintentional opening for dynamic applications
• Spring-loaded locking pin secures hand lever against self-releasing
• Lightweight made of high-strength aluminum, anodized
• Optional mounting surface for energy feed-through

*Cycles dependent upon the MGW material.

By turning the semi cylindrical bolt by 180°, the upper assembly and lower assembly are secured together. When locking, the lower assembly is pulled up by the lever action. A centering disc can be installed on both the upper assembly (robot side) and lower assembly (tool side) of the robot and ensures that the tools are correctly aligned with the robot arm.

The MTC-612 is the largest manual tool changer in our line up and consists of 6 through-ports sized for G1/2 fittings which can be used for either vacuum or pressure. Customized robot flange plates ranging from 20-55mm and 80-100mm diameter patterns makes the MTC-612 a universal solution for your quick change needs.

DESTACO’s TC1 Series tool changers are ultralight, compact, and ideal for cobot work cells and applications requiring custom coupling solutions. Designed for safety, ease of use, durability, and excellent repeatability, this tool changer features a very low profile and a coupling solution with pneumatic and electrical pass-thru capability. The tool changer features IS0 9409 mounting, plus a highly adaptive blank version that is easily modified by machine builders for application specific needs.