DESTACO COMPACT, ELECTRIC 2-JAW PARALLEL GRIPPERS – RPE SERIES Specifications

No reviews yet.
Write a review!

Ranked Nr. 375 of 236 Grippers

FIND SUPPLIER

See all 236 Grippers



These electric parallel grippers have a spring closed feature that allows for full grip force during power off conditions. They require simple 24VDC pulsed signal, without programmable or expensive controller required. Adjustable inductive proximity sensors are also available. Easily integrated into current engineering and manufacturing processes. Their compact design allows for gripping small parts in small spaces. Preloaded “Dual-V” roller bearings eliminate sideplay for excellent part position repeatability. Low friction mechanism allows for repeatable gripping forces for holding delicate parts. Gripforce is constant throughout stroke. A corrosion resistant shield protects the drive and bearing mechanism. All internal components are lubricated with Krytox™grease. All moving components are located within the corrosion resistant cover.

Choose your model:
COMPACT, ELECTRIC 2-JAW PARALLEL GRIPPERS – RPE SERIES Parallel Electric, 2-Jaw Parallel Grippers Tested for 20+ Million Cycles – DPE Series Parallel
Energy source
  • Electric
  • Compressed air
  • Hydraulic powered
Operation type
  • Angular
  • Parallel
  • Vacuum
  • Palletizer
  • Magnetic
  • Adhesive
  • Soft
  • Radial
  • Centric
Number of fingers
  • 0
  • 1
  • 2
  • 3
  • 4
  • 5+

COMPACT, ELECTRIC 2-JAW PARALLEL GRIPPERS – RPE SERIES Downloads

GR EPG RPE US 2552
You need to register to download this file.
GR EPG RPE GB 3102
You need to register to download this file.

COMPACT, ELECTRIC 2-JAW PARALLEL GRIPPERS – RPE SERIES Alternatives

See all 563 Grippers
DESTACO DPE Series Electric Parallel Grippers Electric, 2-Jaw Parallel Grippers Tested for 20+ Million Cycles – DPE Series
Parallel
No reviews yet.
As easy as a pneumatic gripper to control and operate, these electric parallel grippers are plug and play with no programming, tuning or adjusting required. The units only 3W required, can be driven directly by most PLC’s without a separate power supply, and can be battery driven for remote applications. They offer 20+ million cycles with zero maintenance! This higher reliability eliminates down time and offers the lowest cost of ownership or any gripper – pneumatic or electric. The built-in electronics are sealed within the gripper, and there’s no external control board needed. 4-pin/wire control cable sold separately. 24 VDC, 4-wire input: power, ground, open and closed signals. 100% duty cycle for high throughput.
DESTACO Electric, 2-Jaw Parallel Grippers Tested for 20+ Million Cycles – DPE Series
Parallel
No reviews yet.
As easy as a pneumatic gripper to control and operate, these electric parallel grippers are plug and play with no programming, tuning or adjusting required. The units only 3W required, can be driven directly by most PLC’s without a separate power supply, and can be battery driven for remote applications. They offer 20+ million cycles with zero maintenance! This higher reliability eliminates down time and offers the lowest cost of ownership or any gripper – pneumatic or electric. The built-in electronics are sealed within the gripper, and there’s no external control board needed. 4-pin/wire control cable sold separately. 24 VDC, 4-wire input: power, ground, open and closed signals. 100% duty cycle for high throughput.
DESTACO COMPACT, ROBUST PARALLEL GRIPPERS FOR CONFINED SPACES – DPDS SERIES
Parallel
No reviews yet.
Destaco’s DPDS Series includes compact, robust parallel grippers for use in confined spaces requiring a high grip force, as well as multiple part gripping that uses manifold features to create gripper arrays and long finger gripping applications. High impact resistant with double wedge design. Finger mounting on end or bottom of jaws. Thru-body mounting and multiple mounting features simplified installation. Multiple air ports support manifold interface using O-rings. Purge/scavenge ports for harsh & clean environments. Corrosion resistance hardware option.
DESTACO GENERAL PURPOSE MODULAR, PARALLEL GRIPPERS WITH MULTI-POSITION SENSING – DPG SERIES
Parallel
No reviews yet.
Designed for CNC machining applications, chip/dry particulate harsh environments, and non-synchronous jaw or fixed jaw clamp operations. These units are rugged general purpose modular grippers with multi-position sensing up to four locations. Each gripper is shielded to repel metal chips and particulates. The spring assist option maintains grip in case of air pressure loss, along with synchronous or non-synchronous jaw operation. Each unit features multiple air ports to support manifold interface using O-rings and two finger mounting surfaces are present on each jaw.
DESTACO LONG, PRECISE PARALLEL GRIPPERS FOR CLEAN ROOMS & HARSH ENVIRONMENTS – RPL|RPLC SERIES
Parallel
No reviews yet.
Designed for clean room and harsh environments (RPLC), delicate part handling with valve controls, projecting requiring long, precise gripper fingers, and high temperature applications using Viton® seals. Excellent part positioning and repeatability. Zero side play using low friction Dual-V roller bearings. Class 10 rated clean-room (RPLC) fits life sciences applications. Low friction for operation in low pressure applications, corrosion resistant design (RPLC). Optional non-synchronous jaw operation with 30°C to +150°C [-20°F to +300°F] operating environment using Viton® seals option. Purge port (RPLC) to prevent contaminants entering gripper. Scavenge port (RPLC) prevents gripper grease from contaminating working environment.
DESTACO MINIATURE, PARALLEL GRIPPERS FOR SMALL PART GRIPPING – RPM|RPMC SERIES
Parallel
No reviews yet.
Ideal for semiconductor and life sciences laboratory applications, ultra-small gripper for space constrained applications, and sealed design operates in harsh environments (RPMC). Viton® seals option for high temperature applications -30°C to +150°C [-20°F to +300°F]. Miniature gripper for small part gripping. Zero side play due to Dual V bearing system. Low friction and smooth operation for precise part position repeatability. Create compact gripper arrays with top manifold design. Adjustable pre-load screws eliminates side play over life of unit. Purge and scavenge ports for clean/harsh environment operation. Units are lubricated with clean-room grease and hold a class 10 rating for clean-rooms (RPMC).
DESTACO LONG STROKE, PARALLEL GRIPPERS FOR FOUNDRIES & HEAVY PARTS HANDLING – RPR SERIES
Parallel
No reviews yet.
Designed for foundry applications, gantry systems, and large heavy part handling. These units are high rigidity and robust long stroke grippers. Grip force of 4559N with strokes from 150mm to 350mm. Rack and pinion for synchronized jaw operation. Optional integral rod lock that lock jaws in position upon air loss. Shaft wiper seals protects internal bearings from contaminants. Optional Viton® seals for high temp applications. Customized sensing and linear encoder solutions available.
DESTACO SEALED, PARALLEL GRIPPERS FOR AUTOMOTIVE ASSEMBLY & PACKAGING – RPS SERIES
Parallel
No reviews yet.
Designed for automotive assembly, critical part drop prevention applications, general purpose spring assist gripping, and packaging applications. Robust sealed design gripper. Double wedge design for high impact applications. Spring assist option for part retention in case of air pressure loss. Inductive jaw location sensing. Grip force range from 222N [50 lbs] to 2669N [600 lbs] and stroke range from 6.4mm [0.25 in] to 31.8mm [1.25 in].
DESTACO WIDE BODY, PARALLEL GRIPPERS FOR HARSH ENVIRONMENTS – RPW SERIES
Parallel
No reviews yet.
Designed for wide part gripping, gantry systems, and harsh gripping environments. These robust, wide body grippers can perform at grip force ranges from 222N thru 2091N and strokes ranging from 19mm thru 114mm. They feature a rack and pinion design for smooth operation, and the jaws well supported to grip large and wide parts. Double rod seals for extended life in harsh environments and optional non-synchronous jaw operation.
DESTACO MULTI-PURPOSE, POWERFUL PARALLEL GRIPPERS FOR HEAVY PARTS – RTH SERIES
Parallel
No reviews yet.
Designed for large round shaped parts, automotive engine block and gantry systems, and very heavy part gripping. These units are rugged, multi-purpose powerful grippers. They’re available in eight sizes for small lightweight to very large and heavy part gripping. High impact resistant with triple wedge design. Shielded gripper to repel metal chips/particulates and spring assist option maintains grip in case of air pressure loss. Purge and scavenge ports for harsh and clean environments. Multi-position sensing up to three locations.
DESTACO GENERAL PURPOSE, PARALLEL MODULAR GRIPPERS FOR HIGH IMPACT APPLICATIONS – DPDL SERIES
Parallel
No reviews yet.
These parallel grippers are designed for use in machine coolant and metal chip environment applications, high impact applications, and paintbooths or sandblasting applications. These rugged, general purpose modular grippers offer high impact resistance with double wedge design. Harsh environments with sealed rubber boot jaw option. Thru-body mounting and multiple mounting features simplifies installation. Multiple air ports support manifold interface using O-rings. Purge and scavenge ports for harsh & clean environments.
See all COMPACT, ELECTRIC 2-JAW PARALLEL GRIPPERS – RPE SERIES Alternatives