DESTACO ENCLOSED, MODULAR MINI-CLAMP WITH SELF-LOCKING LINKAGE – GR84 SERIES Alternatives & Competitors

This modular sheet metal gripper is offered with several jaw opening and point options and two cylinder sizes. You also have the option to configure your model’s porting, open/closed sensor, and part present sensor.

This light-duty, modular cam-style pressroom gripper is self-locking and can be used vertically or horizontally. It’s available in a range of opening angles for the upper and lower jaws. Common applications include the gripping, holding, placing, removing and transporting of metal sheets and other parts, mainly in jigs and handling systems.

This light-duty, modular cam-style pressroom gripper is self-locking and can be used vertically or horizontally. It’s available in a range of opening angles for the upper and lower jaws. Common applications include the gripping, holding, placing, removing and transporting of metal sheets and other parts, mainly in jigs and handling systems. This gripper differentiates itself from the base 84A2 because of its variable port design.

This medium-duty, modular cam-style pressroom gripper is self-locking and can be used vertically or horizontally. It’s available in a range of opening angles for the upper and lower jaws. Common applications include the gripping, holding, placing, removing/transporting of metal sheets and other parts, mainly in jigs and handling systems.

This heavy-duty, modular cam-style pressroom gripper is self-locking and can be used vertically or horizontally. It’s available in a range of opening angles for the upper and lower jaws. Common applications include the gripping, holding, placing, removing and transporting of metal sheets and other parts, mainly in jigs and handling systems.

This light-duty, modular cam-style pressroom gripper is non-locking and can be used vertically or horizontally. Common applications include the gripping, holding, placing, removing and transporting of metal sheets and other parts, mainly in jigs and handling systems.

This medium-duty, modular cam-style pressroom gripper is non-locking and can be used vertically or horizontally. Common applications include the gripping, holding, placing, removing and transporting of metal sheets and other parts, mainly in jigs and handling systems.

The 84N Series Sheet Metal Gripper accelerates your stamping press operations by producing more stamped parts per hour with higher efficiency while reducing moment loads and overall system wear and tear.

The 84N2 Series Sheet Metal Gripper accelerates your stamping press operations by producing more stamped parts per hour with higher efficiency while reducing moment loads and overall system wear and tear.

As easy as a pneumatic gripper to control and operate, these electric parallel grippers are plug and play with no programming, tuning or adjusting required. The units only 3W required, can be driven directly by most PLC’s without a separate power supply, and can be battery driven for remote applications. They offer 20+ million cycles with zero maintenance! This higher reliability eliminates down time and offers the lowest cost of ownership or any gripper – pneumatic or electric. The built-in electronics are sealed within the gripper, and there’s no external control board needed. 4-pin/wire control cable sold separately. 24 VDC, 4-wire input: power, ground, open and closed signals. 100% duty cycle for high throughput.