Leuze RSL 410 - 450P Alternatives & Competitors

In addition to the features of the RSL 400 family, the model variants RSL 425, 445 and 455P also have high-quality measurement value output for navigating AGVs. The high quality of the data and the small measurement error are achieved through the narrow laser spot that maintains its perpendicular shape over the entire scanning angle.

Always the right solution:
Operating ranges of 3 m to 8.25 m and various function variants offer tailor‑made solutions for your applications

Navigation of AGVs:
The high-quality measurement data output with a resolution of 0.1° delivers the data needed for reliable AGV navigation

PROFIsafe integration:
Simple integration into industrial networks by using variants with PROFIsafe / PROFINET interface

Easy handling:
By means of removable connection unit, integrated display and integrated level

The Standard version of these type 4 safety light curtains features a start/restart interlock (RES) and contactor monitoring (EDM) for increased performance – and it is simple to handle and integrate into your systems. Reaching under and stepping behind protection as well as rear zone guarding can be efficiently implemented with the cascadable model.

Advantages:
Basic functions such as automatic start/restart, start/restart interlock (RES), contactor monitoring (EDM)
Optimal handling due to function selection without PC as well as LED and 7-segment display with integrated 3-zone alignment aid
Prevention of mutual interference of the sensors by selectable transmission channels and range reduction, if applicable
Models for cascading up to three devices facilitate easy implementation of reaching under and stepping behind protection as well as rear zone guarding
Short delivery times and global availability
QR code on the sensor for quick service information

The Panasonic SD3 Safety Laser Scanner is a cost-effective alternative for guarding danger zones. It can be used flexibly in confined spaces and for areas where the danger zone changes.

The SD3 can monitor an area within an angle of up to 190° and divides it into 2 zones: a warning zone within a radius of 15m, and a protection zone within a radius of 4m. The contours of these zones can be configured precisely for any application. Up to eight zone patterns can be set and activated at any given time even during operation.

The reference boundary function memorizes the position of stationary objects and establishes a virtual boundary. It also monitors beam alignment after installation and issues an alarm if a beam becomes misaligned.

Properties:

Blanking features for blanking any obstacles in the detection field

integrated switching unit, contactor control and restart interlock activated by Dip-switches

can be connected directly to contactors/valves, switching capacity 0,5A/24V

minimum safety distance due to short response times, between 5 ms and 25 ms, depending on constructional length

detection of smallest obstacles (14 mm / 30 mm) inside a detection range of 7 meters / 24 meters

between 7 and 247 beams with protective heights from 100 up until 2500 mm

micro-processor controlled safety functions

muting and stroke operation with optional safety control-unit PLSG

self-monitoring semiconductor outputs with line interruption monito ring, short-circuit- and side current passages check

built-in self-diagnosis with error display

protective system IP 65 (waterproof sealed)

Properties:

Integrated control-unit with contactor control and restart can be programmed without a PC

Contactor/valves directly connectablly, switching capacity 0,5A/24V

Smallest safety distances by short response times 4 ms to 29 ms, depending of the protection high

Finger and hand protection with up to 5m protective width(resolution 14 mm and 30 mm)

Protection heights from 100mm to 1500 mm in steps of 100 mm

Microcontroller monitoring of the safety functions (self-monitored)

Semiconductor outputs with short-circuit and crossconnection monitoring

Integrated self-diagnosis with a fault indication by 7-digit display

Optional safety switchgears permit muting and clocked operation

Direct connection via M12 connector

Compact design 25 x 35 mm w/ flexible fastening by tenon blocks and protection category IP 65

Properties:

• Integrated control-unit with contactor control and restart can be programmed without a PC
• Contactor/valves directly connectablly, switching capacity 0,5A/24V
• Smallest safety distances by short response times 4 ms to 29 ms, depending of the protection high
• Finger and hand protection with up to 5m protective width(resolution 14 mm and 30 mm)
• Protection heights from 100mm to 1500 mm in steps of 100 mm
• Microcontroller monitoring of the safety functions (self-monitored)
• Semiconductor outputs with short-circuit and crossconnection monitoring
• Integrated self-diagnosis with a fault indication by 7-digit display
• Optional safety switchgears permit muting and clocked operation
• Direct connection via M12 connector
• Compact design 25 x 35 mm w/ flexible fastening by tenon blocks and protection category IP 65

The MLC 530 SPG Smart Process Gating variant is the specialist for access guarding with material transport. It allows for a particularly compact system design as it works without the use of muting sensors. Process control takes place here in combination with the system controller. This provides a high level of protection against tampering and at the same time a high degree of availability.

Advantages:
Integrated Smart Process Gating function for process control together with the system controller, no muting sensors necessary
Allows the system to be very compact and thus saves valuable space
Optimal handling due to function selection without PC as well as LED and 7-segment display with integrated 3-zone alignment aid
Reduced risk of tampering and increased reliability for a high degree of system availability

Featuring a rugged and reliable housing design, the C4000 Palletizer ATEX II 3G/3D safety light curtain is specially designed and approved for use under the strict safety requirements found in explosion-hazardous areas. The added safety and productivity it offers in explosive atmospheres make it a popular choice time and again.

At a glance:

• ATEX II 3G / 3D classification thanks to modified C4000 housing
• Muting alternative
• Self-teaching, dynamic blanking for detection of goods
• Direction detection
• Reduced resolution: 1 or 2 beams
• Multiple sampling of objects possible
• Beam coding
• Object gap suppression

The C4-RD safety light curtain is the economic solution for hazardous point protection with the highest level of safety for finger and hand protection. With protective field heights from 150 mm and variants available in 50 mm increments, the C4-RD is ideally suited for use in applications with small access areas to the hazardous point. The thin, clever holder concepts and absence of blind zones enables seamless integration into machines. The rugged design of C4-RD also ensures high availability, and the standardized connectivity and status LEDs guarantee easy commissioning and diagnostics. With a comprehensive range of safety sensors, safe control solutions and a worldwide service network, SICK is the optimal partner for functional safety.

At a glance:

• Protective field heights: 150 mm to 1,200 mm, available in 50 mm increments
• Thin, clever brackets and absence of blind zones
• Rugged housing and high electromagnetic compatibility (EMC)
• Standardized connectivity and status LEDs
• Resolutions: 14 mm and 30 mm
• Typical scanning range: Up to 4.5 m

Properties:

integrated control-unit with contactor control and restart activatable by DIP switches activatable

contactor/valves directly connectablly, switching capacity 0,5A/24V

smallest safety distances by short response times 4,5ms to 24,5ms, depending of the protection high

smallest obstacle recognition of 14mm from 0,3m to 7m range

protection heights of 100mm to 1900mm in 100mm steps

microprocessor monitoring of the safety functions

built in selfdiagnostic with error display

muting and stroke operation with optional safety control-unit PLSG

protective system IP65