Top 10 Automatic tool changer ATC Series Alternatives

  • ABB 3HAC021652-002
  • Gifu Compact Rotary Disc Tool Magazine
  • Gifu Chain Type Tool Changer
  • Gifu 40# For Vertical Machining Centers
  • Gifu 30# For Vertical Machining Centers
  • Gifu 40#/ 50# Chain type Tool Magazine
  • Gifu 50# For Vertical Machining Centers
  • Grip SWA Connector
  • Grip MGW Connector
  • ANUBIS 3D MTC-612 MANUAL TOOL CHANGERS (6 X 12MM)
  • DESTACO MANUAL TOOL CHANGERS - TC1 SERIES
1
ABB 3HAC021652-002
No reviews yet.
Product mass 16.86kg
2
Gifu Compact Rotary Disc Tool Magazine
No reviews yet.
Product mass 8kg



Tool magazine drive source: Electric, Servo

3
Gifu Chain Type Tool Changer
No reviews yet.
Product mass 8kg



Tool Magazine Drive Source: Electric, Servo

4
Gifu 40# For Vertical Machining Centers
No reviews yet.
Product mass 8kg



Light-Weight and Brick Modularized Structure Disc Type Tool Magazine with Simultaneously Tool Changing Mechanism

5
Gifu 30# For Vertical Machining Centers
No reviews yet.
Product mass 3kg



High Speed Disc Type Tool Magazine with Nonimpact Arm and Simultaneous Linkage with Spindle on Tool Unloading Mechanism.

6
Gifu 40#/ 50# Chain type Tool Magazine
No reviews yet.
Product mass 8-25 kg



Tool Magazine Drive Source: Electric, Servo

7
Gifu 50# For Vertical Machining Centers
No reviews yet.
Product mass 15kg



Disc Type Tool Magazine

8
Grip SWA Connector
No reviews yet.
Payload 8-62 kg | Product mass 0-5 kg


The SWA Connector has a very low profile for applications with very little space. The transverse screw clamps the upper and lower assembly of the SWA with two wedge-shaped locking flanges, creating a form-fit without any play.


SWA Connector advantages:

  • Extremely low profile
  • Easy to use
  • Low weight, made of high-strength aluminum, anodized
  • Available in steel, optionally nitrated
  • High repeatability < 0.02 mm
  • Durable - 10,000 cycles
  • Interface according to DIN EN ISO 9409-1
9
Grip MGW Connector
No reviews yet.
Payload 10-120 kg | Product mass 0-10.5 kg


The MGW Connector is our universal quick changer for every application and we have made it even better! The new system is of higher quality and offers more safety and accuracy. The innovations are a response to the current requirements of our customers. A centering disc can be installed on both the upper assembly (robot side) and lower assembly (tool side) of the robot and ensures that the tools are correctly aligned with the robot arm.


MGW Connector advantages:

  • Interface according to DIN EN ISO 9409-1
  • Durable - 5,000/10,000 cycles*
  • Withstands high loads
  • No tool required due to integrated operating lever
  • Intuitive operation
  • Can be released and closed with one hand
  • Protection against unintentional opening for dynamic applications
  • Spring-loaded locking pin secures hand lever against self-releasing
  • Lightweight made of high-strength aluminum, anodized
  • Optional mounting surface for energy feed-through

*Cycles dependent upon the MGW material.


By turning the semi cylindrical bolt by 180°, the upper assembly and lower assembly are secured together. When locking, the lower assembly is pulled up by the lever action. A centering disc can be installed on both the upper assembly (robot side) and lower assembly (tool side) of the robot and ensures that the tools are correctly aligned with the robot arm.

10
ANUBIS 3D MTC-612 MANUAL TOOL CHANGERS (6 X 12MM)
No reviews yet.
Payload 80kg | Product mass 1.45kg


The MTC-612 is the largest manual tool changer in our line up and consists of 6 through-ports sized for G1/2 fittings which can be used for either vacuum or pressure. Customized robot flange plates ranging from 20-55mm and 80-100mm diameter patterns makes the MTC-612 a universal solution for your quick change needs.