ROBOWORLD Universal Robots UR3/UR3e Robosuit Specifications

Write a review!

Ranked Nr. 48 of 95 Robot Accessories

FIND SUPPLIER

Add to comparison

The Robosuit® is a protective cover for the full range of UR arms. The UR3 Robosuit ® consist of 11 components: a base skirt, base skirt ring, base cover, lower arm, lower arm ring, upper arm ring, upper arm, upper arm, upper arm ring, wrist, and wrist ring. Components interlock/ join via either PVC rings or simple cuff-overlaps. Velcro seams are featured unless otherwise specified.

Each cover is custom-manufactured to your specific application and need and will protect your UR robot from extremes in temperature, sharp metal turnings, cutting fluids and coolants, and particulate (grit, dust, and debris).

FEATURES:

12OZ 1000-Denier nylon UR3 Robosuit ®:

Excellent general use material for basic protection form dust, dirt, and large grit
Not suited for use in wet applications as the material is breathable
Very low abrasion resistance
Wide range of colours available
Available in both e-series and CB

18OZ Fire-retardant PVC Vinyl UR3 Robosuit ®:

Excellent general use material for most water-soluble coolants and cutting fluids, fine mesh, grits and powders, de-ionized water, and limited protection from pressurized water sprays/ mist
Very low level of chemical and abrasion resistance
Wide range of colour choices available
Available in both e-series and CB

17OZ Hypalon ® impregnated vinyl UR3 Robosuit ®:

Excellent material for use in high-abrasion environments as well as metal chips (de-burr/cutting)
Provides limited levels of protection from water spray/ mist while offering good levels of chemical resistance
Limited range of colour choices available
Available in both e-series and CB

Aluminum coated Kevlar ® UR3 Robosuit ®:

Excellent material for use in high and low heat environments, light sparks and for UV protection
Nominal insulating factor of R-0.7
Maximum radiant operating temperature of 1500F. Minimum operating temperature -65F
Sliver in colour
Available in e-series and CB

10-Mil laminated Teflon ® UR3 Robosuit ®:

Excellent protection in (caustic) chemical environments
FDA approved option, however, does not equate to the Robosuit ® being FDA-approved
Maximum radiant operating temperature of 650F
Grey in colour
Available in e-series and CB

Isotherm ® weld splatter UR3 Robosuit ®:

Excellent material for use in low-inertia weld splatter and heavy spark applications
Maximum sustain (radiant) operating temperature of 500F. short-term exposure of 700F
Grey in colour
Available in e-series and CB

Type	Barcode Scanner Feeders Cobot Tracks Cobot- Platforms Actuators Energy chain kit Protective covers Safety and certification

Universal Robots UR3/UR3e Robosuit Downloads

Universal Robots UR3 Installation Instructions

Universal Robots UR3/UR3e Robosuit Alternatives

See all 115 Robot Accessories

ROBOWORLD Universal Robots UR5/UR5e Robosuit

Protective covers

No reviews yet.

The Robosuit® is a protective cover for the full range of UR arms. The UR5 Robosuit ® consists of nine suit components: a base skirt, base cover, lower arm, shoulder, upper arm, wrist, and three ring-retainers. Components interlock/join via either PVC rings or simple cuff-overlaps. Velcro seams are featured unless otherwise specified. The e-series version of the Robosuit ® includes four additional components: a J6 seal, and three additional ring-retainers. Each cover is custom-manufactured to your specific application and need and will protect your UR robot from extremes in temperature, sharp metal turnings, cutting fluids and coolants, and particulate (grit, dust, and debris). FEATURES:12OZ 1000-Denier nylon UR5 Robosuit ®:Excellent general use material for basic protection from dust, dirt, and large gritNot suited for use in wet applications as the material is breathableVery low level of abrasion resistanceWide range of colour choices availableAvailable in e-series and CB18OZ Fire-retardant PVC vinyl UR5 Robosuit ®:Excellent general use material for most water-soluble coolants and cutting fluids, fine mesh grits dust and powders, de-ionized water, and limited protection from pressurized water spray/mistVery low level of chemical and abrasion resistanceWide range of colour choices availableAvailable in e-series and CB17OZ Hypalon ® impregnated vinyl UR5 Robosuit®:Excellent material for use in high-abrasion environments as well as metal chips (de-burr/cutting)Provides limited levels of protection from water spray/ mist while offering good levels of chemical resistanceLimited range of colour choices availableAvailable in e-series and CBAluminum coated Kevlar ® UR5 Robosuit ®:Excellent material for use in high and low heat environments, light sparks and for UV protectionNominal insulating factor of R-0.7Maximum radiant operating temperature of 1250F. Minimum operating temperature -65FSliver in colourAvailable in e-series and CB10-Mil laminated Teflon® UR5 Robosuit ®:Excellent protection in (caustic) chemical environmentsFDA approved option, however, that does not equate to the Robosuit ® being FDA-approvedMaximum radiant operating temperature of 650FGrey in colourAvailable in e-series and CBIsotherm ® weld splatter UR5 Robosuit ®:Excellent material for use in low-inertia weld splatter and heavy spark applicationsMaximum sustain (radiant) operating temperature of 500F. Short-term exposure to 700FGrey in colourAvailable in e-series and CB

ROBOWORLD Universal Robots UR10/UR10e Robosuit

Protective covers

No reviews yet.

The UR10 Robosuit ® consists of nine suit components: a base skirt, base cover, lower arm, shoulder, upper arm, wrist, and three ring-retainers. Components join/interlock via either PVC rings or simple cuff-overlaps. The design is such that each adjoining piece “mates” with the next. Velcro seams are featured unless otherwise specified. The e-series version of the Robosuit ® includes two additional components: a J6 ring retainer and dedicated tool flange cover. Each cover is custom manufactured to your specific application and need and will protect your UR robot from extremes in temperature, sharp metal turnings, cutting fluids and coolants, and particulate (grit, dust, and debris). FEATURES: 12OZ 1000 Denier nylon UR10 Robosuit ®:Excellent general use material for basic protection from dust, dirt, and large gritNot suited for use in wet applications as the material is breathableVery low level of abrasion resistanceWide range of colour choices availableAvailable in e-series and CB18OZ Fire-retardant PVC vinyl UR10 Robosuit ®:Excellent general use material for most water-soluble coolants and cutting fluids, fine mesh grits and powders, de-ionized water, and limited protection from pressurized water sprays/ mistVery low level of chemical and abrasion resistanceWide range of colour choices availableAvailable in e-series and CB17OZ Hypalon ® impregnated vinyl UR10 Robosuit ®:Excellent material for use in high-abrasion environments as well as metal chips (de-burr/cutting)Provides limited levels of protection from water spray/ mist while offering good levels of chemical resistanceLimited range of colour choices availableAvailable in e-series and CBAluminum coated Kevlar ® UR10 Robosuit ®:Excellent material for use in high and low heat environments, light sparks and for UV protectionNominal insulating factor of R-0.7Maximum radiant operating temperature of 1500F. Minimum operating temperature -65FSilver in colourAvailable in e-series and CB10-Mil laminated Teflon ® UR10 Robosuit ®:Excellent protection in (caustic) chemical environmentsFDA approved option, however, that does not equate to the Robosuit ® being FDA-approvedMaximum radiant operating temperature of 650FGrey in colourAvailable in e-series and CBIsotherm ® weld splatter UR10 Robosuit ®:Excellent material for use in low-inertia weld splatter and heavy spark applicationsMaximum sustain (radiant) operating temperature of 500F. Short-term exposure to 700FGrey in colourAvailable in e-series and CB

ROBOWORLD Climate-Controlled Robosuit®

Protective covers

No reviews yet.

The Climate-Controlled Robosuit® allows users to employ a UR robot in manufacturing conditions beyond the OEM-specified environmental conditions (temperature, humidity, chemical exposure, etc.). Please be certain to indicate if your need is for heating, cooling or both if requesting further information. How does it work? It is a turnkey solution that can heat, cool or pressurize the Robosuit®, effectively isolating the robot from extreme manufacturing conditions. FEATURES: Allows users to employ a robot in conditions that would otherwise preclude automation. It isolates the robot from temperatures, chemicals and other environmental extremes—protecting the robot, and ensuring clean/efficient maintenance in the future. Dimensions: Palletized shipment (44”x36”x24”). Weight: 105lbs. Palletized shipment (112cm x 92cm x 61cm). Weight 48kg.What’s in the box?Robosuit®, Stainless Steel Base Pan, Environmental Control Unit (ECU)—heater/cooler/fan-only, hose and all necessary clamps and hardware.

See all Universal Robots UR3/UR3e Robosuit Alternatives