SCHUNK PGF Alternatives & Competitors

Electric 2-finger parallel gripper with smooth-running base jaws guided on roller bearings.

2-finger angular parallel gripper with gripper finger actuation of up to 90° per jaw.

Thin 2-jaw parallel gripper

The thin body enables flexible system design

The high restoration accuracy by utilizing workholding technology of lathe chucks

NPGT achieves higher gripping force than the similar stroke model

Variety of options including several detection methods and the model with a through hole

Close Force(N): 1000

Open Force(N): 860

* Air pressure set at 0.6 MPa.

Measurement Distance L(mm): 10

Jaw Stroke: 20.8mm(dia.), 10.4mm(per finger)

Through Hole (mm): 7.8

Thin 2-jaw parallel gripper

The thin body enables flexible system design

The high restoration accuracy by utilizing workholding technology of lathe chucks

NPGT achieves higher gripping force than the similar stroke model

Variety of options including several detection methods.

Close Force(N): 600

Open Force(N): 500

* Air pressure set at 0.6 MPa.

Measurement Distance L(mm): 10

Jaw Stroke: 16.6mm(dia.), 8.3mm(per finger)

Pneumatic 2-finger parallel gripper with large jaw stroke, high gripping force and profiled rail guide for the use of long gripper fingers.

Universal 2-finger parallel gripper with a large jaw stroke, integrated sensor system and high payload due to use of a multi-tooth guidance.

Sturdy 2-finger parallel gripper for heavy components and a broad part range, equipped with robust guides.

2-finger parallel gripper with long jaw stroke for large parts and/or a broad range of parts.

Quick jaw exchange gripper

Reduce jaw exchange time

Replace jaws without tools

Modification from an existing NTS gripper is possible

One set of hard jaws supports workpieces from φ20 to φ60 on NTS309

Proximity switches can not be used for the quick jaw change grippers.

Close Force(N): 1810

Open Force(N): 1930

* Air pressure set at 0.6 MPa.

Measurement Distance L(mm): 20

Jaw Stroke: 20mm(dia.), 10mm(per finger)

Quick jaw exchange gripper

Reduce jaw exchange time

Replace jaws without tools

Modification from an existing NTS gripper is possible

One set of hard jaws supports workpieces from φ20 to φ60 on NTS309

Proximity switches can not be used for the quick jaw change grippers.

Close Force(N): 1810

Open Force(N): 1930

* Air pressure set at 0.6 MPa.

Measurement Distance L(mm): 20

Jaw Stroke: 20mm(dia.), 10mm(per finger)