SCHUNK PSH Alternatives & Competitors

2-finger parallel gripper with smooth roller guides of the base jaws.

2-finger angular parallel gripper with gripper finger actuation of up to 90° per jaw.

2-finger parallel gripper with long jaw stroke for large parts and/or a broad range of parts.

2-finger parallel gripper with long jaw stroke for large parts and/or a broad range of parts.

Narrow 2-finger parallel gripper with large stroke.

Universal 2-finger parallel gripper with a large jaw stroke, integrated sensor system and high payload due to use of a multi-tooth guidance.

Pneumatic 2-finger parallel gripper with large jaw stroke, high gripping force and profiled rail guide for the use of long gripper fingers.

Servo-electric 2-finger parallel gripper with sensitive gripping force control and long stroke.

Thin 2-jaw parallel gripper

The thin body enables flexible system design

The high restoration accuracy by utilizing workholding technology of lathe chucks

NPGT achieves higher gripping force than the similar stroke model

Variety of options including several detection methods and the model with a through hole

Close Force(N): 1000

Open Force(N): 860

* Air pressure set at 0.6 MPa.

Measurement Distance L(mm): 10

Jaw Stroke: 20.8mm(dia.), 10.4mm(per finger)

Through Hole (mm): 7.8

Thin 2-jaw parallel gripper

The thin body enables flexible system design

The high restoration accuracy by utilizing workholding technology of lathe chucks

NPGT achieves higher gripping force than the similar stroke model

Variety of options including several detection methods.

Close Force(N): 600

Open Force(N): 500

* Air pressure set at 0.6 MPa.

Measurement Distance L(mm): 10

Jaw Stroke: 16.6mm(dia.), 8.3mm(per finger)