DESTACO COMPACT, ELECTRIC 2-JAW PARALLEL GRIPPERS FOR ENGINEERING & MANUFACTURING – RPE SERIES Alternatives & Competitors

The G110 and G120 series families of grippers include 20 model sizes with varying stroke options. An extended jaw option is offered that is finger compatible with competing products for easier upgrades.

As easy as a pneumatic gripper to control and operate, these electric parallel grippers are plug and play with no programming, tuning or adjusting required. The units only 3W required, can be driven directly by most PLC’s without a separate power supply, and can be battery driven for remote applications. They offer 20+ million cycles with zero maintenance! This higher reliability eliminates down time and offers the lowest cost of ownership or any gripper – pneumatic or electric. The built-in electronics are sealed within the gripper, and there’s no external control board needed. 4-pin/wire control cable sold separately. 24 VDC, 4-wire input: power, ground, open and closed signals. 100% duty cycle for high throughput.

This gripper series is designed for direct product contact in the food zone, according to the food industry standard. (EN 1672-2) All parts are corrosion resistant, non-toxic, non-contaminating, non-porous, non-absorbent and non-reactive. Its stainless steel design resists chemical cleaning procedures. The optional body conforms to FDA standards and is made of High Performance Polymer for a significantly lighter weight. Its electro-polished exterior with no recessed or inaccessible zones prevents retention of contaminants and simplifies cleaning. The sealed motion components (IP69K design) are made for high-pressure and high-temperature daily cleanings. Any metal/metal contact is protected by a gasket for leakproof assembly against bacteria. This angular gripper design offers easier radial sealing of jaws. The optional security springs help with external gripping, in case of air supply failure, in single acting or spring assist mode. There are no external fasteners to avoid any foreign matter in food. This gripper contains special lubricants suitable for food industry and a long maintenance-free service life.

Designed for hydraulic powered gripping applications, confined spaces in harsh environments, and welding applications with protective boot option. The 2P Series includes robust, powerful, and precise multi-purpose grippers. Pneumatic or hydraulic powered operation. Optional tandem cylinder doubles grip force. Protective boot and shielded design for harsh environments. Spring assist option maintains grip in case of air pressure loss.

Designed for hydraulic powered gripping applications, confined spaces in harsh environment applications, and welding applications with protective boot option. Destaco’s 3P Series includes robust, powerful, and precise multi-purpose grippers. Pneumatic or hydraulic powered operation. Optional tandem cylinder doubles grip force. Protective boot and shielded design for harsh environments. Spring assist option maintains grip in case of air pressure loss. Uses inductive sensors for jaw position detection.

Designed for OEM pick-and-place machines, packaging applications, and general purpose gripping. Destaco’s CP Series features a compact cam lever design for these general purpose square grippers. Two jaw styles available, parallel or extended finger jaw. Spring assist option for part retention in case of air pressure loss. Standard and extended stroke option available. Shielded design for harsh environments. Magneto-resistive and inductive sensing.

This enclosed, modular mini-clamp has a high power-to-weight ratio and is a highly versatile gripper that can be configured for many different applications. The GR84 utilizes a self-locking linkage system. If the air is lost while fully closed, the mini-clamp will continue to hold the part.

This light-duty, modular cam-style pressroom gripper is self-locking and can be used vertically or horizontally. It’s available in a range of opening angles for the upper and lower jaws. Common applications include the gripping, holding, placing, removing and transporting of metal sheets and other parts, mainly in jigs and handling systems.

This light-duty, modular cam-style pressroom gripper is self-locking and can be used vertically or horizontally. It’s available in a range of opening angles for the upper and lower jaws. Common applications include the gripping, holding, placing, removing and transporting of metal sheets and other parts, mainly in jigs and handling systems. This gripper differentiates itself from the base 84A2 because of its variable port design.

This medium-duty, modular cam-style pressroom gripper is self-locking and can be used vertically or horizontally. It’s available in a range of opening angles for the upper and lower jaws. Common applications include the gripping, holding, placing, removing/transporting of metal sheets and other parts, mainly in jigs and handling systems.