DESTACO MODULAR ROBOT TOOL CHANGERS – RQC & RTP SERIES Alternatives & Competitors

Ranked Nr. 89 of 112 End of Arm Tools

Top 10 MODULAR ROBOT TOOL CHANGERS – RQC & RTP SERIES Alternatives

  • AGI Automation Components AGTC TOOL CHANGER
  • Millibar Robotics Manual Tool Changer
  • Mindman MCTC Automatic Tool Changer
  • KOSMEK SWL Robotic Hand Changer
  • Grip MGW Connector
1
AGI Automation Components AGTC TOOL CHANGER
No reviews yet.
Payload 90.72kg | Product mass 1.88kg


The AGTC Tool Changer line provides a strong and reliable method for a manipulator (i.e., a robot) to quickly change between different tools/end-effectors. With its modular design, we offer the maximum flexibility for any application.

OPTIONAL UTILITIES: 1. 4x M5 User Pneumatic Ports 2. Electrical Passthru (Signal, Communication, etc.) 3. Hardware Kit

2
Millibar Robotics Manual Tool Changer
No reviews yet.
Payload 50kg



The Millibar Manual Tool Changer allows operators to effortlessly change tools for high mix, low volume production applications.

Without any tools, quickly switch between adaptive grippers, vacuum grippers, camera calibration stylus, and more. Simply release the locking lever and slide a new tool into place.

Even if your facility has a variety of robot brands, the Millibar Manual Tool Changer ecosystem allows tools to be moved between robots.

4
KOSMEK SWL Robotic Hand Changer
No reviews yet.
Payload 80-300 kg | Product mass 2.7-12.5 kg

Payload Line-up : 80kg/120kg/180kg/300kg.
Applicable to ISO Mounting Pattern.


Super-Thin

Clamped state dimension 
SWL0800:53mm SWL1200:62mm SWL1800:70mm SWL3000:83mm

Direct Mounting on Robots

Applicable to ISO Mounting Pattern.


Fall Prevention
Mechanically holds connection even when air pressure is at 0MPa.

5
Grip MGW Connector
No reviews yet.
Payload 10-120 kg | Product mass 0-10.5 kg


The MGW Connector is our universal quick changer for every application and we have made it even better! The new system is of higher quality and offers more safety and accuracy. The innovations are a response to the current requirements of our customers. A centering disc can be installed on both the upper assembly (robot side) and lower assembly (tool side) of the robot and ensures that the tools are correctly aligned with the robot arm.


MGW Connector advantages:

  • Interface according to DIN EN ISO 9409-1
  • Durable - 5,000/10,000 cycles*
  • Withstands high loads
  • No tool required due to integrated operating lever
  • Intuitive operation
  • Can be released and closed with one hand
  • Protection against unintentional opening for dynamic applications
  • Spring-loaded locking pin secures hand lever against self-releasing
  • Lightweight made of high-strength aluminum, anodized
  • Optional mounting surface for energy feed-through

*Cycles dependent upon the MGW material.


By turning the semi cylindrical bolt by 180°, the upper assembly and lower assembly are secured together. When locking, the lower assembly is pulled up by the lever action. A centering disc can be installed on both the upper assembly (robot side) and lower assembly (tool side) of the robot and ensures that the tools are correctly aligned with the robot arm.