DESTACO MODULAR ROBOT TOOL CHANGERS – RQC & RTP SERIES Specifications

No reviews yet.
Write a review!

Ranked Nr. 89 of 115 End of Arm Tools

FIND SUPPLIER

See all 115 End of Arm Tools


DESTACO’s RQC & RTP Series of modular robot tool changers lead the industry with a full product line covering up to 1200lbs [545Kg]. A wide variety of utilities are available to quick disconnect, I/O, air, water, weld power, servo power, vacuum lines. These models feature a high level of flexibility accommodating up to 4 optional modules to be picked up among a wide choice, 6 patented roller mechanisms that provide a low stress and highly rigid locking capability, and accommodations for the two halves to couple and to be safe in case of air failure.

Type
  • Collision/Torque Sensors
  • Compensation Unit
  • Compilance Devices
  • Connectors
  • Dispensers
  • Force Torque Sensors
  • Sanders
  • Screwdrivers
  • Tool Changers
  • Vacuum Generators
  • Welding Torches
  • Wrist Cameras
Payload 90-1089 kg
Extra info Speed Matters - Change end effectors in seconds using DESTACO's wide range of automatic or manual tool changers. / Increase Strength - Our highly engineered locking mechanism increases rigidity and load capacity making DESTACO tool changers ideal for any robotic application. / Reduce downtime - Greatly reduce machine downtime with integrated air ports and electrical connectors that provide immediate power to your system and eliminates manual re-connection of air lines or sensors. /

MODULAR ROBOT TOOL CHANGERS – RQC & RTP SERIES Downloads

S3 TC RQTP Automatic Tool Changers US 2615
You need to register to download this file.

MODULAR ROBOT TOOL CHANGERS – RQC & RTP SERIES Alternatives

See all 171 End of Arm Tools
AGI Automation Components AGTC TOOL CHANGER
Payload 90.72kg | Product mass 1.88kg
No reviews yet.
The AGTC Tool Changer line provides a strong and reliable method for a manipulator (i.e., a robot) to quickly change between different tools/end-effectors. With its modular design, we offer the maximum flexibility for any application. OPTIONAL UTILITIES: 1. 4x M5 User Pneumatic Ports 2. Electrical Passthru (Signal, Communication, etc.) 3. Hardware Kit
Millibar Robotics Manual Tool Changer
Payload 50kg
No reviews yet.
The Millibar Manual Tool Changer allows operators to effortlessly change tools for high mix, low volume production applications. Without any tools, quickly switch between adaptive grippers, vacuum grippers, camera calibration stylus, and more. Simply release the locking lever and slide a new tool into place. Even if your facility has a variety of robot brands, the Millibar Manual Tool Changer ecosystem allows tools to be moved between robots.
Mindman MCTC Automatic Tool Changer
Payload 25kg
No reviews yet.
KOSMEK SWL Robotic Hand Changer
Payload 80-300 kg | Product mass 2.7-12.5 kg
No reviews yet.
Payload Line-up : 80kg/120kg/180kg/300kg.Applicable to ISO Mounting Pattern. Super-Thin Clamped state dimension　SWL0800：53mm SWL1200：62mm　SWL1800：70mm　SWL3000：83mm Direct Mounting on Robots Applicable to ISO Mounting Pattern. Fall PreventionMechanically holds connection even when air pressure is at 0MPa.
Grip MGW Connector
Payload 10-120 kg | Product mass 0-10.5 kg
No reviews yet.
The MGW Connector is our universal quick changer for every application and we have made it even better! The new system is of higher quality and offers more safety and accuracy. The innovations are a response to the current requirements of our customers. A centering disc can be installed on both the upper assembly (robot side) and lower assembly (tool side) of the robot and ensures that the tools are correctly aligned with the robot arm. MGW Connector advantages:Interface according to DIN EN ISO 9409-1Durable - 5,000/10,000 cycles*Withstands high loadsNo tool required due to integrated operating leverIntuitive operationCan be released and closed with one handProtection against unintentional opening for dynamic applicationsSpring-loaded locking pin secures hand lever against self-releasingLightweight made of high-strength aluminum, anodizedOptional mounting surface for energy feed-through*Cycles dependent upon the MGW material. By turning the semi cylindrical bolt by 180°, the upper assembly and lower assembly are secured together. When locking, the lower assembly is pulled up by the lever action. A centering disc can be installed on both the upper assembly (robot side) and lower assembly (tool side) of the robot and ensures that the tools are correctly aligned with the robot arm.
See all MODULAR ROBOT TOOL CHANGERS – RQC & RTP SERIES Alternatives