Fiessler Light curtains ULVT Alternatives & Competitors

Properties:

Blanking features for blanking any obstacles in the detection field

integrated switching unit, contactor control and restart interlock activated by Dip-switches

can be connected directly to contactors/valves, switching capacity 0,5A/24V

minimum safety distance due to short response times, between 5 ms and 25 ms, depending on constructional length

detection of smallest obstacles (14 mm / 30 mm) inside a detection range of 7 meters / 24 meters

between 7 and 247 beams with protective heights from 100 up until 2500 mm

micro-processor controlled safety functions

muting and stroke operation with optional safety control-unit PLSG

self-monitoring semiconductor outputs with line interruption monito ring, short-circuit- and side current passages check

built-in self-diagnosis with error display

protective system IP 65 (waterproof sealed)

Properties:

Integrated control-unit with contactor control and restart can be programmed without a PC

Contactor/valves directly connectablly, switching capacity 0,5A/24V

Smallest safety distances by short response times 4 ms to 29 ms, depending of the protection high

Finger and hand protection with up to 5m protective width(resolution 14 mm and 30 mm)

Protection heights from 100mm to 1500 mm in steps of 100 mm

Microcontroller monitoring of the safety functions (self-monitored)

Semiconductor outputs with short-circuit and crossconnection monitoring

Integrated self-diagnosis with a fault indication by 7-digit display

Optional safety switchgears permit muting and clocked operation

Direct connection via M12 connector

Compact design 25 x 35 mm w/ flexible fastening by tenon blocks and protection category IP 65

Properties:

• Integrated control-unit with contactor control and restart can be programmed without a PC
• Contactor/valves directly connectablly, switching capacity 0,5A/24V
• Smallest safety distances by short response times 4 ms to 29 ms, depending of the protection high
• Finger and hand protection with up to 5m protective width(resolution 14 mm and 30 mm)
• Protection heights from 100mm to 1500 mm in steps of 100 mm
• Microcontroller monitoring of the safety functions (self-monitored)
• Semiconductor outputs with short-circuit and crossconnection monitoring
• Integrated self-diagnosis with a fault indication by 7-digit display
• Optional safety switchgears permit muting and clocked operation
• Direct connection via M12 connector
• Compact design 25 x 35 mm w/ flexible fastening by tenon blocks and protection category IP 65