Gimatic Quick changer for collaborative robots - QC75 Alternatives & Competitors

Manual quick changers are very popular in the plastics sector and are used to quickly change EOATs while the mould is being changed. Gimatic’s QC series of quick changers enable a significant reduction of tool change time as they feature built-in air chan.

• Quick tool change on the robot.
• Also suitable for vacuum pipelines.
• Avoids errors in pneumatic and electrical connections.
• 4, 8, 10 or 12 pneumatic connections.
• 15 electrical connections
• The two parts (robot side and gripper side) are supplied separately.
• The QCX robot side can also cut off the compressed air with a safety valve.
• The QCY robot side cuts off the compressed air automatically during disengagement.
• Optional LOQC lock unit

Gimatic’s EQC electric quick changers are automatic tool changers driven by a built-in electric motor. They are plug-and-play devices and therefore require no driver.

• Fully automatic version.
• Plug & Play system.
• Designed to collaborative robot application.
• Optional flange ISO 9409 to interface directly with robot.
• Power cable with 8-pin M8x1 connector, length 200 mm.
• 24 Vdc low voltage supply.
• Up to 6 user pneumatic connections.
• Optional electric connectors to be positioned in the central through hole.

Pneumatic tool change system with patented locking system for heavy loads

Features:

• _{Rigid mounting very close to main mass of ATC prevents vibration while exchanging heavy tools.}
• _{Magazine rotation either by cam index or by servo drive.}
• _{Encoder for synchronisation of arm movements with tool clamp / unclamp in machine spindle.}
• _{Tool Gripper plates of gripper arm are designed as separate parts for easy conversion of ATC from one tool standard to another.}
• _{Choice of Aluminium or high strength plastic tool pockets.}
• _{Option of mechanical tool load unload feature in tool magazine.}
• _{Magazine capacities of 20, 24, 30 and 40 tools.}

Vast reduction in changeover time as well as automation for numerous types of application and workpieces.

■Automatic tool change in multiple grippers and tools
Vast reduction in changeover time as well as automation for numerous types of application and workpieces
■Anti-drop mechanism for standard models
Grippers and other tools can be retained even at a sudden air loss, and which prevents peripheral devices from being damaged
■Various options
Various options such as electrode (15-pin for electric signals, signal cable, and D-sub connector), tool stands (for 1 or 2-piece), and check valves.

Manual tool change system with integrated air feed-through, locking monitoring, and optional electric feed-through.

High Speed Disc Type Tool Magazine with Nonimpact Arm and Simultaneous Linkage with Spindle on Tool Unloading Mechanism.

Compact, manual change system with integrated air feed-throughs for the most important SCHUNK gripping and compensation modules.

Payload Line-up : 80kg/120kg/180kg/300kg.
Applicable to ISO Mounting Pattern.

Super-Thin

Clamped state dimension　
SWL0800：53mm SWL1200：62mm　SWL1800：70mm　SWL3000：83mm

Direct Mounting on Robots

Applicable to ISO Mounting Pattern.

Fall Prevention
Mechanically holds connection even when air pressure is at 0MPa.

Tool magazine drive source: Electric, Servo