KOSMEK SWL Robotic Hand Changer Specifications

No reviews yet.
Write a review!

Ranked Nr. 148 of 116 End of Arm Tools

FIND SUPPLIER

See all 116 End of Arm Tools

Payload Line-up : 80kg/120kg/180kg/300kg.
Applicable to ISO Mounting Pattern.


Super-Thin

Clamped state dimension　
SWL0800：53mm SWL1200：62mm　SWL1800：70mm　SWL3000：83mm

Direct Mounting on Robots

Applicable to ISO Mounting Pattern.


Fall Prevention
Mechanically holds connection even when air pressure is at 0MPa.

Type
  • Collision/Torque Sensors
  • Compensation Unit
  • Compilance Devices
  • Connectors
  • Dispensers
  • Force Torque Sensors
  • Sanders
  • Screwdrivers
  • Tool Changers
  • Vacuum Generators
  • Welding Torches
  • Wrist Cameras
Payload 80-300 kg
Product mass 2.7-12.5 kg
Extra info Payload Line-up : 80kg/120kg/180kg/300kg. Applicable to ISO Mounting Pattern. Super-Thin Clamped state dimension　 SWL0800：53mm SWL1200：62mm　SWL1800：70mm　SWL3000：83mm Direct Mounting on Robots Applicable to ISO Mounting Pattern. Fall Prevention Mechanically holds connection even when air pressure is at 0MPa.

SWL Robotic Hand Changer Alternatives

See all 173 End of Arm Tools
ANUBIS 3D MTC-612 MANUAL TOOL CHANGERS (6 X 12MM)
Payload 80kg | Product mass 1.45kg
No reviews yet.
The MTC-612 is the largest manual tool changer in our line up and consists of 6 through-ports sized for G1/2 fittings which can be used for either vacuum or pressure. Customized robot flange plates ranging from 20-55mm and 80-100mm diameter patterns makes the MTC-612 a universal solution for your quick change needs.
Grip MGW Connector
Payload 10-120 kg | Product mass 0-10.5 kg
No reviews yet.
The MGW Connector is our universal quick changer for every application and we have made it even better! The new system is of higher quality and offers more safety and accuracy. The innovations are a response to the current requirements of our customers. A centering disc can be installed on both the upper assembly (robot side) and lower assembly (tool side) of the robot and ensures that the tools are correctly aligned with the robot arm. MGW Connector advantages:Interface according to DIN EN ISO 9409-1Durable - 5,000/10,000 cycles*Withstands high loadsNo tool required due to integrated operating leverIntuitive operationCan be released and closed with one handProtection against unintentional opening for dynamic applicationsSpring-loaded locking pin secures hand lever against self-releasingLightweight made of high-strength aluminum, anodizedOptional mounting surface for energy feed-through*Cycles dependent upon the MGW material. By turning the semi cylindrical bolt by 180°, the upper assembly and lower assembly are secured together. When locking, the lower assembly is pulled up by the lever action. A centering disc can be installed on both the upper assembly (robot side) and lower assembly (tool side) of the robot and ensures that the tools are correctly aligned with the robot arm.
KONSEI KHAC Large Auto Tool Changer
Payload 25-300 kg | Product mass 1.5kg
No reviews yet.
Auto Tool Changer for Large Robot ■7 sizes and 8 models with payload limit ranging from 25 to 300 kg are available as a standard lineup.■Clean room compliant types as standard models■Anti-drop mechanism for standard models■Max. 18 air ports (300kg payload limit)■Check valves comes as standard■Electrode for ground and electric signals for power are available
Gifu 30# For Vertical Machining Centers
Product mass 3kg
No reviews yet.
High Speed Disc Type Tool Magazine with Nonimpact Arm and Simultaneous Linkage with Spindle on Tool Unloading Mechanism.
Gifu Compact Rotary Disc Tool Magazine
Product mass 8kg
No reviews yet.
Tool magazine drive source: Electric, Servo
Gifu Chain Type Tool Changer
Product mass 8kg
No reviews yet.
Tool Magazine Drive Source: Electric, Servo
Gifu 40# For Vertical Machining Centers
Product mass 8kg
No reviews yet.
Light-Weight and Brick Modularized Structure Disc Type Tool Magazine with Simultaneously Tool Changing Mechanism
Grip SHW Connector
Payload 12-68 kg | Product mass 0-4 kg
No reviews yet.
The SHW Connector is a manual tool changer with an optimized locking mechanism. The connector consists of a cylindrical bolt which locks the upper and lower assembly together. A centering disc can be installed on both the upper assembly (robot side) and lower assembly (tool side) of the robot and ensures that the tools are correctly aligned with the robot arm. SHW Connector Advantages:Interface according to DIN EN ISO 9409-1High repeatability < 0.02 mmDurable - 5,000 cyclesWithstands high loads with low dead weightToolless due to integrated operating leverImproved operating lever with pure folding movementIntuitive operation: can be released and closed with one handLightweight made of high-strength aluminum, anodizedIntegrated mounting surface for energy feed-throughLocking pin secures the hand lever against unintentional release
KONSEI KHA Large Auto Tool Changer
Payload 25-300 kg | Product mass 1.1-23.6 kg
No reviews yet.
Auto Tool Changer for Large Robot. ■7 sizes and 8 models with payload limit ranging from 25 to 300 kg are available as a standard lineup.■Anti-drop mechanism for standard models■Max. 18 air ports (300kg payload limit)■Check valves comes as standard■Electrode for ground and electric signals for power are available
DESTACO MANUAL TOOL CHANGERS - TC1 SERIES
Payload 10kg | Product mass 0.33kg
No reviews yet.
DESTACO’s TC1 Series tool changers are ultralight, compact, and ideal for cobot work cells and applications requiring custom coupling solutions. Designed for safety, ease of use, durability, and excellent repeatability, this tool changer features a very low profile and a coupling solution with pneumatic and electrical pass-thru capability. The tool changer features IS0 9409 mounting, plus a highly adaptive blank version that is easily modified by machine builders for application specific needs.
Grip SWA Connector
Payload 8-62 kg | Product mass 0-5 kg
No reviews yet.
The SWA Connector has a very low profile for applications with very little space. The transverse screw clamps the upper and lower assembly of the SWA with two wedge-shaped locking flanges, creating a form-fit without any play. SWA Connector advantages:Extremely low profileEasy to useLow weight, made of high-strength aluminum, anodizedAvailable in steel, optionally nitratedHigh repeatability < 0.02 mmDurable - 10,000 cyclesInterface according to DIN EN ISO 9409-1
See all SWL Robotic Hand Changer Alternatives