Photonfocus DR1-D1312-200-G2 Specifications

No reviews yet.
Write a review!

Ranked Nr. 66 of 126 2D Vision Systems

FIND SUPPLIER

See all 126 2D Vision Systems

The Double Rate camera series DR1-D1312(IE)-200-G2 is based on the Photonfocus A1312 and A1312IE CMOS image sensors with LinLog® technology. The Double-Rate cameras are nearly 100% faster than standard GigE cameras and use only one data cable (no link-aggregation). The Photonfocus A1312 CMOS sensors with a full well capacity (FWC) of 90 ke- are optimized for high dynamic range applications and a high signal-to-noise ratio (SNR). The cameras have the GigE interface (GigEVision).

Resolution Frame rate [fps]
1312 x 1082135
1024 x 1024180
800 x 600385
640 x 480585
544 x 512636


Due to their excellent capabilities of managing high frame rates CMOS cameras are at the fore front of high speed image capturing and image analysis. Until recently CMOS high speed cameras were used as compact camera heads with an internal image buffer or as landed camera heads with a CameraLink full interface and frame grabbers with a large image buffer.

Applications such as motion analysis (e.g. in the area of bionic, sports or biomechanical analysis) and process failure analysis (e.g. burst or fracture of tools, failure of handling systems, breakdown of packaging systems) require frame rates which are increasingly being provided by fast CMOS standard cameras. These are also used in machine vision applications. The preferred camera choice for such applications are standard machine vision cameras with a GigE interface due to their flexibility in long transmission distance. For even faster motion analysis cameras with a double frame rate, being captured with a GigE interface and a combined link aggregation with recording systems are required.

Photonfocus has recognized the need and requirements of these applications. Their double rate (DR) camera technology displays a double bandwidth for data transmission via the standardized GigE Vision interface, common for machine vision applications. The technology is based on the standard software protocol GeniCam. This Photonfocus technology is based on standard bandwidth tools and standard software libraries used for high speed image capturing. Even a multiple camera system set-up can be easily implemented due to the usage of the GigE standard, in contrary to a point-to-point connection as used in Link aggregation solutions. With the GigE standard the data transmission is not getting interrupted.


Comparison of data rates of different interfaces used in machine vision

For this applications Photonfocus has developed the Double Rate (DR) camera technology which is setup on the standard implementation of the GigE interface and standard software protocols as GigEVision and GenICam. In the result high speed applications could be realized with standard tools and libraries. The setup of multi camera systems is easy and is not disabled as with link aggregation.

The Double Rate technology overcome the draw backs of link aggregation and enables frame rates of 585fps @ VGA resolution and 204fps @ 960 x 960 pixel. The Double-Rate camera DR1-D1312-200-G2-8 is 25% faster than standard Cameralink Base cameras and 100% faster than standard GigE cameras.


FEATURES:

  • Double Rate technology
  • Configurable region of interest (ROI)
  • Up to 512 regions of interest (MROI)
  • Decimation in y-direction
  • Image correction
  • 2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)
  • Constant frame rate independent of exposure time
  • Crosshairs overlay on the image
  • 3x3 convolver for image preprocessing
  • Temperature monitoring of sensor and camera
  • Ultra low trigger delay and low trigger jitter
  • Extended trigger input and strobe output functionality
Choose your model:
BL1-D1024E-160-CL Monochrome BL1-D2048x1088-96-G2 Monochrome | Near-infrared HD1-D1312-80-G2 Monochrome MV1-D1280-120-CL Monochrome | Color OEM-D1024E-160-LC Monochrome OEM-D2080-160-LC Monochrome | Near-infrared MV1-D1312-240-CL Monochrome | Near-infrared DR1-D1312-200-G2 Monochrome | Near-infrared
Image Type
  • Color
  • Hyperspectral
  • Monochrome
  • Multispectral
  • MWIR
  • Near-infrared
  • SWIR
Resolution 1312-544

DR1-D1312-200-G2 Downloads

Photonfocus datasheet DR1 D1312 200 G2
You need to register to download this file.

DR1-D1312-200-G2 Alternatives

See all 324 2D Vision Systems
iRAYPLE Smart Cameras
Monochrome | Frame rate 35FPS
No reviews yet.
iRAYPLE Smart Cameras are advanced imaging devices specifically designed for industrial automation applications. These cameras are equipped with a range of standout features and capabilities, making them a powerful and versatile solution for various machine vision tasks.One notable feature of iRAYPLE Smart Cameras is their integration of the self-developed MVP (Machine Vision Platform) algorithm platform. This embedded platform combines image processing, algorithm tools, communication control, and other modules into a single device. This integration enables the cameras to perform tasks such as positioning, identification, measurement, and inspection with high accuracy and efficiency. The MVP algorithm platform provides robust and reliable performance, ensuring precise results for complex machine vision applications.iRAYPLE Smart Cameras are built on the Windows 10 operating system, which offers a user-friendly environment for development and customization. The familiarity and flexibility of the Windows 10 OS make it easier for developers to create and optimize machine vision applications according to specific requirements. This compatibility with Windows 10 also ensures seamless integration with existing industrial systems and software tools, simplifying the deployment process.The cameras feature a GigE interface, allowing for high-speed data transfer and communication with other devices or systems. This interface facilitates fast and reliable connection to networks or industrial control systems, enabling efficient data exchange and real-time monitoring. iRAYPLE Smart Cameras also provide a rich I/O interface, offering versatility in connecting with external devices such as sensors, actuators, and trigger mechanisms. This flexibility enhances the cameras' capability to interact with the surrounding environment and perform complex automation tasks.With their industrial design, iRAYPLE Smart Cameras are well-suited for use in various industrial settings. They are built to withstand harsh conditions and operate reliably in demanding environments. These cameras are equipped with features like high tolerance for extreme temperatures, shock resistance, and vibration resistance, ensuring their durability and stability in industrial automation applications.In conclusion, iRAYPLE Smart Cameras offer a range of standout features and capabilities that make them a unique option for industrial automation. With their self-developed MVP algorithm platform, these cameras provide powerful image processing and algorithm tools for precise positioning, identification, measurement, and inspection tasks. The compatibility with Windows 10 OS simplifies development and customization, while the GigE interface and rich I/O interface enable fast and flexible connectivity. The industrial design ensures their reliability and durability in challenging industrial environments. iRAYPLE Smart Cameras are a versatile and efficient solution for a wide range of machine vision applications in industrial automation.
iRAYPLE Area Scan Cameras
Color | Monochrome | Frame rate 815FPS
No reviews yet.
Area Scan Cameras by iRAYPLE are highly versatile and reliable tools for industrial automation. These cameras are designed to deliver outstanding image quality and precise details, making them suitable for a wide range of applications. With resolution options ranging from 0.3MP to an impressive 151MP, iRAYPLE's Area Scan Cameras provide exceptional clarity and precision.One standout feature of these cameras is their compact size, which makes them easy to integrate into existing systems or installations. This allows for seamless incorporation into various industrial environments, ensuring efficient and effective operation.The high resolution and frame rate capabilities of iRAYPLE's Area Scan Cameras enable the capture of fast-moving objects or processes with exceptional clarity. This makes them ideal for applications that require detailed inspection, quality control, or monitoring of production lines.These cameras boast powerful performance and a perfect blend of functions, thanks to their high-quality imaging chips and advanced built-in ISP (Image Signal Processing) imaging algorithm. This combination ensures optimal image processing and enhancement, resulting in superior image quality and accuracy.In addition to their impressive features, iRAYPLE's Area Scan Cameras also offer specialized specifications that cater to specific industrial automation needs. For example, they may have a wide temperature tolerance range, enabling reliable operation in extreme temperature environments. Furthermore, these cameras can be compatible with various software systems, allowing for seamless integration and data analysis with specific software platforms commonly used in industrial automation setups.Overall, iRAYPLE's Area Scan Cameras are a reliable and efficient choice for industrial automation applications that require high-resolution imaging, precise details, and robust performance. With their exceptional image quality, compact design, and compatibility with specialized software systems, these cameras provide the necessary tools for accurate and reliable visual inspection and monitoring in industrial settings.
Photonfocus MV1-D1312-240-CL
Monochrome | Near-infrared
No reviews yet.
The camera series MV1-D1312(IE)-240-CL is based on the Photonfocus A1312 and A1312IE CMOS image sensors. These Photonfocus CMOS sensors with a full well capacity (FWC) of 90 ke- are optimized for high dynamic range applications and a high signal-to-noise ratio (SNR). The cameras have the CameraLink Base interface. These cameras focus on demanding applications in industrial image processing. They offer an extraordinary wide dynamic range due to the LinLog® technology and a high framerate combined with high resolution. Due to the global shutter, even high-speed applications with exposure times in the µs-area are possible.FEATURES: Configurable region of interest (ROI)Up to 512 regions of interest (MROI)Decimation in y-directionImage correction2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)Constant frame rate independent of exposure timeCrosshairs overlay on the image3x3 convolver for image preprocessingTemperature monitoring of sensor and cameraCamera informations readable over SDKUltra low trigger delay and low trigger jitterExtended trigger input and strobe output functionalityStatus line in picture
Photonfocus HD1-D1312-80-G2
Monochrome
No reviews yet.
The camera series HD1-D1312-80-G2 is based on the Photonfocus A1312 CMOS image sensor with LinLog® technology. This Photonfocus CMOS sensor with a full well capacity (FWC) of 90 ke- is optimized for high dynamic range applications and a high signal-to-noise ratio (SNR). The sensor A1312 has an additional feature to widen the dynamic range. It is possible to expose the odd and even lines independently and choose also a independent sensor response curve. This enables different LinLog® settings for each field. The cameras have the GigE interface (GigEVision).The high dynamic range camera series HD1-D1312 is a result of the demand for high dynamic range (HDR) images with linear response curve. The camera benefits from the odd/even exposure feature of the Photonfocus CMOS sensor A1312. This feature allows operating odd and even rows of the image sensor independently. In consequence the exposure time and the response curve of both fields could be setup independently. This enables a lot of applications which are well described in the literature.The following pictures show an example for an interpolation and display with the help of a tone mapping algorithm. The exposure time of the even field was approximately 10 times longer than the exposure time of the odd field. The response curve in each field was linear. Even field with long exposure time Odd field with short exposure time Interpolated HDR image dispayed with tone mapping FEATURES: Odd/even HDR modeConfigurable region of interest (ROI)Up to 512 regions of interest (MROI)Decimation in y-directionImage correction2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)Constant frame rate independent of exposure timeCrosshairs overlay on the image3x3 convolver for image preprocessingTemperature monitoring of sensor and cameraCamera informations readable over SDKUltra low trigger delay and low trigger jitterExtended trigger input and strobe output functionalityStatus line in picture
Photonfocus DR0-D1920-S01-480-G2
Monochrome
No reviews yet.
The camera DR0-D1920-S01-480-G2 is based on the SONY IMX174 CMOS image sensor. The IMX174 CMOS image sensor is optimized for low light conditions and is available as standard monochrome version. The Double-Rate cameras are nearly 100% faster than standard GigE cameras and use only one data cable (no link-aggregation). The camera has the GigE interface (GigEVision). ResolutionFrame rate [fps]1920 x 1200941920 x 10801041024 x 1024196640 x 480402 Due to their excellent capabilities of managing high frame rates CMOS cameras are at the fore front of high speed image capturing and image analysis. Until recently CMOS high speed cameras were used as compact camera heads with an internal image buffer or as landed camera heads with a CameraLink full interface and frame grabbers with a large image buffer.Applications such as motion analysis (e.g. in the area of bionic, sports or biomechanical analysis) and process failure analysis (e.g. burst or fracture of tools, failure of handling systems, breakdown of packaging systems) require frame rates which are increasingly being provided by fast CMOS standard cameras. These are also used in machine vision applications. The preferred camera choice for such applications are standard machine vision cameras with a GigE interface due to their flexibility in long transmission distance. For even faster motion analysis cameras with a double frame rate, being captured with a GigE interface and a combined link aggregation with recording systems are required.Photonfocus has recognized the need and requirements of these applications. Their double rate (DR) camera technology displays a double bandwidth for data transmission via the standardized GigE Vision interface, common for machine vision applications. The technology is based on the standard software protocol GeniCam. This Photonfocus technology is based on standard bandwidth tools and standard software libraries used for high speed image capturing. Even a multiple camera system set-up can be easily implemented due to the usage of the GigE standard, in contrary to a point-to-point connection as used in Link aggregation solutions. With the GigE standard the data transmission is not getting interrupted. Comparison of data rates of different interfaces used in machine visionThis technology eliminates the complications of systems using cameras with link aggregation right from the beginning.Once more Photonfocus demonstrates its industry leader position in the area of cutting edge high speed camera systems. The double rate (DR) camera technology is up to 25% faster than conventional CameraLink base cameras and even 100% faster than mainstream cameras with a standard GigE interface.An additional advantage of the implemented modulation technology is the capability to save unmodified image formats. The storage space for all image sequences is almost half the size of standard solutions. This is made possible thanks to the real picture format saving which enables fast sequence search runs.
Photonfocus MV0-D1280-O01-144-G2
Monochrome | Near-infrared
No reviews yet.
The camera series MV0-D1280(I)-O01-144-G2 is based on the ON Semiconductor PYTHON1300 CMOS image sensor. The PYTHON1300 CMOS image sensors are optimized for low light conditions and are available as standard monochrome and as NIR (I) version. The cameras have the GigE interface (GigEVision).These cameras focus on demanding applications in industrial image processing. They are optimized for low light applications. Due to the global shutter, even high-speed applications with exposure times in the µs-area are possible. FEATURES: Configurable region of interest (ROI)Up to 8 regions of interest (MROI)Decimation in y-direction2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)Constant frame rate independent of exposure timeCrosshairs overlay on the imageTemperature monitoring of cameraCamera informations readable over SDKUltra low trigger delay and low trigger jitterExtended trigger input and strobe output functionalityStatus line in picture
Photonfocus OEM0-D1984-O01-144-G2
Monochrome | Near-infrared
No reviews yet.
The camera series OEM0-D1984(I)-O01-144-G2 is based on the ON Semiconductor PYTHON2000 CMOS image sensor. The PYTHON2000 CMOS image sensors are optimized for low light conditions and are available as standard monochrome and as NIR version. The cameras have the GigE interface (GigEVision).These cameras focus on demanding applications in industrial image processing. They are optimized for low light applications. Due to the global shutter, even high-speed applications with exposure times in the µs-area are possible. FEATURES: Configurable region of interest (ROI)Up to 8 regions of interest (MROI)Decimation in y-direction2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)Constant frame rate independent of exposure timeCrosshairs overlay on the imageTemperature monitoring of cameraCamera informations readable over SDKUltra low trigger delay and low trigger jitterExtended trigger input and strobe output functionalityStatus line in picture
Photonfocus MV0-D2048-C01-160-G2
Monochrome | Near-infrared
No reviews yet.
The camera series MV0-D2048(I)-C01-160-G2 is based on the CMOSIS CMV4000 V3 CMOS image sensor. The CMV4000 V3 CMOS image sensors are optimized for low light conditions and are available as standard monochrome and as NIR (I) version. The cameras have the GigE interface (GigEVision).These cameras focus on demanding applications in industrial image processing. They are optimized for low light applications. Due to the global shutter, even high-speed applications with exposure times in the µs-area are possible. FEATURES:Configurable region of interest (ROI)Up to 8 regions of interest (MROI)Decimation in y-direction2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)Constant frame rate independent of exposure timeCrosshairs overlay on the imageTemperature monitoring of cameraCamera informations readable over SDKUltra low trigger delay and low trigger jitterExtended trigger input and strobe output functionalityStatus line in picture
Photonfocus MV0-D2592-O01-144-G2
Monochrome | Near-infrared
No reviews yet.
The camera series MV0-D2592(I)-O01-144-G2 is based on the ON Semiconductor PYTHON5000 CMOS image sensor. The PYTHON5000 CMOS image sensors are optimized for low light conditions and are available as standard monochrome and as NIR (I) version. The cameras have the GigE interface (GigEVision).These cameras focus on demanding applications in industrial image processing. They are optimized for low light applications. Due to the global shutter, even high-speed applications with exposure times in the µs-area are possible. FEATURES: Configurable region of interest (ROI)Up to 8 regions of interest (MROI)Decimation in y-direction2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)Constant frame rate independent of exposure timeCrosshairs overlay on the imageTemperature monitoring of cameraCamera informations readable over SDKUltra low trigger delay and low trigger jitterExtended trigger input and strobe output functionalityStatus line in picture
Photonfocus MV2-D2448-S01-G1
Monochrome
No reviews yet.
The camera series MV2-D2448-S01-G1 is based on the SONY IMX250 CMOS image sensor. The IMX250 CMOS image sensor is optimized for low light conditions and is available as standard monochrome version. The camera has the GigE interface (GigEVision).These cameras focus on demanding applications in industrial image processing. They are optimized for low light applications. Due to the global shutter, even high-speed applications with exposure times in the µs-area are possible. FEATURES: Configurable region of interest (ROI)Up to 8 regions of interest (MROI)Decimation in y-direction2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)Constant frame rate independent of exposure timeCrosshairs overlay on the imageTemperature monitoring of cameraCamera informations readable over SDKUltra low trigger delay and low trigger jitterExtended trigger input and strobe output functionalityStatus line in picture
Photonfocus MV2-D2448-S01-G1
Monochrome
No reviews yet.
The camera series MV2-D2448-S01-G1 is based on the SONY IMX250 CMOS image sensor. The IMX250 CMOS image sensor is optimized for low light conditions and is available as standard monochrome version. The camera has the GigE interface (GigEVision).These cameras focus on demanding applications in industrial image processing. They are optimized for low light applications. Due to the global shutter, even high-speed applications with exposure times in the µs-area are possible. FEATURES: Configurable region of interest (ROI)Up to 8 regions of interest (MROI)Decimation in y-direction2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)Constant frame rate independent of exposure timeCrosshairs overlay on the imageTemperature monitoring of cameraCamera informations readable over SDKUltra low trigger delay and low trigger jitterExtended trigger input and strobe output functionalityStatus line in picture
See all DR1-D1312-200-G2 Alternatives