DESTACO MANUAL TOOL CHANGERS - TC1 SERIES Alternatives & Competitors

The MGW Connector is our universal quick changer for every application and we have made it even better! The new system is of higher quality and offers more safety and accuracy. The innovations are a response to the current requirements of our customers. A centering disc can be installed on both the upper assembly (robot side) and lower assembly (tool side) of the robot and ensures that the tools are correctly aligned with the robot arm.

MGW Connector advantages:

• Interface according to DIN EN ISO 9409-1
• Durable - 5,000/10,000 cycles*
• Withstands high loads
• No tool required due to integrated operating lever
• Intuitive operation
• Can be released and closed with one hand
• Protection against unintentional opening for dynamic applications
• Spring-loaded locking pin secures hand lever against self-releasing
• Lightweight made of high-strength aluminum, anodized
• Optional mounting surface for energy feed-through

*Cycles dependent upon the MGW material.

By turning the semi cylindrical bolt by 180°, the upper assembly and lower assembly are secured together. When locking, the lower assembly is pulled up by the lever action. A centering disc can be installed on both the upper assembly (robot side) and lower assembly (tool side) of the robot and ensures that the tools are correctly aligned with the robot arm.

High Speed Disc Type Tool Magazine with Nonimpact Arm and Simultaneous Linkage with Spindle on Tool Unloading Mechanism.

Tool magazine drive source: Electric, Servo

Tool Magazine Drive Source: Electric, Servo

Light-Weight and Brick Modularized Structure Disc Type Tool Magazine with Simultaneously Tool Changing Mechanism

The SWA Connector has a very low profile for applications with very little space. The transverse screw clamps the upper and lower assembly of the SWA with two wedge-shaped locking flanges, creating a form-fit without any play.

SWA Connector advantages:

• Extremely low profile
• Easy to use
• Low weight, made of high-strength aluminum, anodized
• Available in steel, optionally nitrated
• High repeatability < 0.02 mm
• Durable - 10,000 cycles
• Interface according to DIN EN ISO 9409-1

The MTC-606 is the smallest tool changer in our line up and consists of 6 through-ports sized for G1/4 fittings which can be used for either vacuum or pressure. Customized robot flange plates ranging from 20-55mm diameter patterns makes the MTC-606 ideal for all your cobot needs

The SHW Connector is a manual tool changer with an optimized locking mechanism. The connector consists of a cylindrical bolt which locks the upper and lower assembly together. A centering disc can be installed on both the upper assembly (robot side) and lower assembly (tool side) of the robot and ensures that the tools are correctly aligned with the robot arm.

SHW Connector Advantages:

• Interface according to DIN EN ISO 9409-1
• High repeatability < 0.02 mm
• Durable - 5,000 cycles
• Withstands high loads with low dead weight
• Toolless due to integrated operating lever
• Improved operating lever with pure folding movement
• Intuitive operation: can be released and closed with one hand
• Lightweight made of high-strength aluminum, anodized
• Integrated mounting surface for energy feed-through
• Locking pin secures the hand lever against unintentional release

The SWS Connector is our power pack for applications with increased force and torque loads. The semi-cylindrical bolt accurately joins the upper and lower assembly without play. A centering disc can be installed on both the upper assembly (robot side) and lower assembly (tool side) of the robot and ensures that the tools are correctly aligned with the robot arm.

SWS Connector advantages

• Operation with square socket key
• Optional Safety-Lock. Prevents unintentional opening in dynamic applications
• Steel version, optionally nitrated
• Optional mounting surface for energy feed-through
• Withstands high loads
• Can be opened and closed with one handle
• High repeatability < 0.02 mm
• Durable - 10,000 cycles
• When locking, the lower assembly is pulled up by the locking action
• Interface according to DIN EN ISO 9409-1

The MTC-612 is the largest manual tool changer in our line up and consists of 6 through-ports sized for G1/2 fittings which can be used for either vacuum or pressure. Customized robot flange plates ranging from 20-55mm and 80-100mm diameter patterns makes the MTC-612 a universal solution for your quick change needs.