Gimatic Manual quick changer - QC Alternatives & Competitors

Manual quick changers are very popular in the plastics sector and are used to quickly change EOATs while the mould is being changed. Gimatic’s QC series of quick changers enable a significant reduction of tool change time as they feature built-in air chan.

Gimatic’s EQC electric quick changers are automatic tool changers driven by a built-in electric motor. They are plug-and-play devices and therefore require no driver.

• Fully automatic version.
• Plug & Play system.
• Designed to collaborative robot application.
• Optional flange ISO 9409 to interface directly with robot.
• Power cable with 8-pin M8x1 connector, length 200 mm.
• 24 Vdc low voltage supply.
• Up to 6 user pneumatic connections.
• Optional electric connectors to be positioned in the central through hole.

Manual tool change system with integrated air feed-through, locking monitoring, and optional electric feed-through.

Compact, manual change system with integrated air feed-throughs for the most important SCHUNK gripping and compensation modules.

Pneumatic tool change system with patented locking system for heavy loads

• Automated tool change without external activation
  In interaction with the storage station, the changer is actuated mechanically during retraction. As a result, no additional power supply is required for the change operation.
• Manual tool change
  The sizes FWR40 and FWR50 can be opened with just one hand. If this is not desired, you can lock the actuation manually.
• Optional media transmission
  Adapt the tool changer to your application. With the energy elements of the WER1000 and WER2000 series, you can transmit a variety of media with standard connections!

Manual tool change system with integrated air feed-through and optional electric feed-through.

• Quick changer basic for IRB1100

• MATCH automatic & manual quick changer

• Manual end-effector change with one-hand function

• Automated changeover without external control

• Integrated signal and media feed-through

• Optical Connect LED and Connect signal to the higher-level controller

• Digital IO

• MATCH quick changer is suitable to work with Zimmer-Grippers and Schmalz Vacuum Devices

• Quick changer advanced for SWIFTI and IRB1100

• MATCH automatic & manual quick changer

• Manual end-effector change with one-hand function

• Automated changeover without external control

• Integrated signal and media feed-through

• Optical Connect LED and Connect signal to the higher-level controller

• IO-Link control

• MATCH quick changer is suitable to work with Zimmer-Grippers and Schmalz Vacuum Devices

Pneumatic pallet change system with patented locking system.