DENSO HSR-048/055/065 Specifications

No reviews yet.
Write a review!

Ranked Nr. 194 of 166 SCARA Robots

FIND SUPPLIER

See all 166 SCARA Robots

Speedy start, speedy continuation of motion, and accurate stopping.


Total arm length｜480 / 550 / 650 mm
Vertical stroke(Z)｜100 / 200 / 320 / 510 mm
Maximum payload｜8kg
Cycle time｜0.28 / 0.31 sec


True High Speed performance never seen before has been achieved.
Sometimes, the performance of a robot cannot be known only from its specifications. You may not be confident whether it can complete the motion within the listed cycle time, or whether it can actually continue its motion. To address those challenges, we have pursued the basic performances of robots—quick acceleration; runs continuously at high speed; stops precisely—that have been requested from fields to the utmost limits, and have developed new high-speed SCARA robots, the HSR Series, that can achieve "True high-speed performance." As a result of pursuing high-speed performance, high-speed picking systems can be realized with small, space-saving robots not only in conventional parts assembly processes, but also in packaging processes of food, medical supplies, and cosmetics, which is bringing about a revolution in performance.

Technical Features:

High-speed motion
High acceleration & motion profiles.
Improved CPM (cycle per minute) allows the robot to
move at high speed continuously.


Continuous motion
Achieving Non-Stop continuous motion.
Improved heat dissipation performance at the base unit allows the robot to achieve continuous motion, which is required in actual processes.


Vibration control
The robot can suppress vibrations in a short time by actively reflecting the status of the arm to vibration control. This can suppress vibrations that occur with high-speed transfer and residual vibrations, reducing the cycle time.


Light weight
Newly designed, highly rigid,lightweight arm.
The combination of between high rigidity and light weight allows the robot to achieve a high payload (8kg) and high-speed motion at the same time.


Improved flexibility in mounting direction
The mounting direction can be switched.
Floor and ceiling mount models available.


Optimum layout
A large-capacity motor is integrated into the base unit. Weight reduction at the tip of the arm and optimized arm structure allow the robot to improve its high-speed performance.

Number of Axes
Repeatability 0 mm
Payload 8 kg
Horizontal Reach 480-650 mm

HSR-048/055/065 Alternatives

See all 216 SCARA Robots
Hirata AR-F650HCs
Reach 650mm | Repeatability 0mm | Payload 2-5 kg
No reviews yet.
Small, High-speed, High-precision, Utility SCARA robot. The most suitable acceleration and deceleration are established automatically from the posture of the arm and smoother movement is achieved.The load it takes for work holding part by movement is reduced and certain movement is executed. A controller unites with robot main body, so controller space of a master control panel can be reduced, so the effect on effective use in space.
Epson LS3-B SCARA Robot - 400mm
Reach 400mm | Repeatability 0mm | Payload 1-3 kg
No reviews yet.
Performance, speed, payload up to 3 kg and a 400 mm reach. Ideal for high-precision, small-parts assembly, the LS3-B SCARA Robot provides a high-performance solution with features including proprietary Residual Vibration Technology and intuitive Epson RC+® development software. Epson’s powerful servo system allows for low residual vibration, high acceleration and deceleration rates, and high-speed cycle times. Available in an ISO 4 Clean version for critical, dust-free applications, the LS3-B delivers a payload up to 3 kg and a reach of 400 mm. It also supports integrated options including parts feeding, vision, fieldbus interface solutions, RC+ 7.0 API software, teach pendants and customizable GUIs. Residual Vibration Technology Intuitive Epson RC+ development software Smooth start/stop with high accel/decel rates Fast cycle times to optimize part throughput Up to 3 kg payload, reach of 400 mm
Turin Robotic automation SCARA STH100
Reach 600-1000 mm | Repeatability 0mm | Payload 10kg
No reviews yet.
Specifications: * Model: STH100 * Arm Reach: 600/800/1000 mm * Payload: 10 Kg *DOF: 4 Axis *Body Weight: 45-50 Kg *Repeat Accuracy: ± 0.02mm *Working Temperature: 0-45° Characteristics: * Using SHIMPO imported reducer and domestic reducer mix-up configuration * Servo motor standard configuration for domestic listed companies famous brand INOVANCE * Optional imported DuomoChuan servo motor and drive * Imported tama - chuan servo motor and drive are optional * Supports Japanese, Portuguese, Spanish, and English * Can use computer to control the robot based on Ethernet TCP/IP
Janome Servo SCARA JS3 Series
Reach 350-550 mm | Repeatability 0mm | Payload 3-6 kg
No reviews yet.
Features Make operation settings without writing a new robot language Dedicated Pick & Place software prepared with all the command types you need. Just choose the robot movements from the menu.Pre-programmed software shortens setup and teaching time. Top Class High Speed Movement and Short Standard Cycle Time Maximum Speed: 8,300mm/sec　　Standard Cycle Time: 0.29secEnhanced high speed movement and continuous operability for increased productivity. Cable and Tube Passage Inside the Robot Mechanism Internal wiring and air tubing to minimize interference from peripheral devices and cables. Expanded Pivot Axis Operating Range The area behind the robot is accessible, eliminating wasteful extra movement and increasing robot installation flexibility. Additional Robot Maintenance Functions Use the robot's running data record as a guide for when to perform maintenance or replace consumable parts. Comprehensive External Interfaces LAN (Ethernet) port, USB memory port, 6 Field Network options, add up to 2 optional auxiliary axes. Making Programs Is Easy Use our original PC software or our teaching pendant. Optional Teaching Pendant II Our interactive input method makes direct teaching easy. Optional "JR C-Points II" PC software Large icons on the software screen make program creation easy.Create, edit and save teaching data and customizing data.We also offer a convenient point graphic editing function*. ①Programming AreaDirectly input and edit program data.②Basic Operation AreaProgram just by choosing the icons you want.③Robot Operations AreaUse the operation icons to make JOG movements. Built-in Simple PLC Function Handles simple communication with external devices; no need for an external PLC. Multilingual Compatibility Switch among 5 display languages with our PC software and 11 display languages on our teaching pendant.
OMRON i4H RS4-2066504
Reach 650mm | Payload 15kg
No reviews yet.
Gain more out of production with a higher payload and faster cycle time
OMRON i4H RS4-2066704
Reach 650mm | Payload 15kg
No reviews yet.
Gain more out of production with a higher payload and faster cycle time
OMRON i4H RS4-2066502
Reach 650mm | Payload 15kg
No reviews yet.
Gain more out of production with a higher payload and faster cycle time
OMRON i4H RS4-2066702
Reach 650mm | Payload 15kg
No reviews yet.
Gain more out of production with a higher payload and faster cycle time
Epson Epson GX8 SCARA Robot - 650mm
Reach 650mm | Repeatability 0mm | Payload 4-8 kg
No reviews yet.
Epson GX. Taking SCARA robot performance to the next level. Introducing the GX8, part of Epson’s new high-power-density SCARA robot lineup. The GX8 builds upon 40 years of expertise to deliver next-level performance and flexibility in a compact footprint. A breakthrough in productivity, the GX8 uses advanced Epson GYROPLUS technology to provide fast production speeds and smooth motion control, all with higher payloads. Engineered to meet your unique automation needs, the GX8 offers multiple arm configurations and a 450-650 mm reach to accomplish the most demanding tasks—including assembly, pick and place, dispensing, and other material handling with ultra high precision. Its innovative slimline design easily integrates into Cleanroom, ESD or Washdown environments and quickly handles payloads up to 8 kg from a conveniently small form factor. Designed for ease of use, Epson RC+® software works seamlessly with the GX8 to create powerful automation solutions and offers integrated options to simplify the most complex applications. Plus, with battery-less encoders, a built-in Ethernet cable and other useful features, it supports a remarkably low total cost of ownership. Ultra high performance and flexibility Handles high payloads from a small footprint Fast cycle times, smooth motion and fast settling times Epson RC+® software helps create powerful automation solutions Advanced Epson GYROPLUS vibration reduction system Also available in 450 mm and 550 mm
See all HSR-048/055/065 Alternatives