Top 10 LS3-B SCARA Robot - 400mm Alternatives

  • Mitsubishi Electric RH-3CRH4018-D-S15
  • FANUC SR-3iA
  • Epson Synthis T3 All-in-One SCARA Robots
  • TM Robotics THL400
  • EVS 4 Axis High Speed High Rigidity SCARA Robot EVS3-400H
  • EVS 4 Axis Universal SCARA Robot EVS3-400
  • DENSO LPH-040
  • Janome Servo SCARA JS3 Series
  • Turin Robotic automation SCARA STH100
  • Epson T3-B All-in-One SCARA Robot
  • Epson Synthis T6 All-in-One SCARA Robots
1
Mitsubishi Electric RH-3CRH4018-D-S15
4.9/5 (3)
Reach 180-400 mm | Repeatability 0mm | Payload 3kg

Industrial Robot; RH-3CRH-D; 4-axis; +/- 0,01mm; 3kg; 400/180mm; incl. CR800

2
FANUC SR-3iA
4.4/5 (1)
Reach 400mm | Payload 3kg
With its 3 kg payload, 400 mm horizontal and 200 mm vertical reach, the FANUC SR-3iA is ideally suited to smaller-scale assembly, pick and place, inspection and packaging applications. Operating within a 360° envelope, the model’s lightweight design, ultra-compact footprint and integrated services minimise the risk of interference with peripheral devices.
3
Epson Synthis T3 All-in-One SCARA Robots
No reviews yet.
Reach 150-400 mm | Repeatability 0mm | Payload 1-3 kg

The Ultimate Slide Alternative:

Efficient operation and seamless integration

Faster installation vs. linear-slide systems

Compact design; built-in controller

Powerful Epson RC+ programming software

400mm arm length; 3Kg max payload


Looking to automate your factory without wasting time or money on complex slide-based solutions? Now you can — with the Synthis T3 SCARA robot from Epson, the #1 SCARA robot manufacturer in the world. This innovative all-in-one offers fast, easy integration and takes less time to install than most automation solutions available. What about space constraints? The T3 virtually eliminates that issue. With a built-in controller, 110 V (or 220 V) power and integrated vision guidance, as well as other options, this space-saving robot has it all — and installs in minutes. Plus, it includes the same intuitive software and powerful features found in Epson’s high-end robots.

4
TM Robotics THL400
No reviews yet.
Reach 400mm | Repeatability 0mm | Payload 5kg

THL series SCARA robots include the THL300 and THL400 with arm lengths of 300mm and 400mm respectively.

Each THL offers a payload of 5kg. Cycle times (with 2kg load) are 48s for the THL300 and 47s for the THL400. All THL robots feature a working envelope of 4 axes, with a Z-axis rotation of 360°.

Maximum speeds range from from 5.1m/s to 6.3m/s overall.


Product Features & Benefits:
Low Cost
Light to Medium Duty
Up to 10kg Payload
Arm lengths from 300 to 1000mm
Ideal for loading and unloading applications

5
EVS 4 Axis High Speed High Rigidity SCARA Robot EVS3-400H
No reviews yet.
Reach 400mm | Repeatability 0mm | Payload 1-3 kg

Scara robot with compact and flexible structure, fast running speed, high transmission accuracy and low noise

Robotic automation highly rigid arm design realizes high load and high speed in one package

Available in 600 to 1000mm arm span; 1kg to 20kg payload

Adapt to G3 control cabinet, provide 23 input and 23 output custom IO; support serial port, network, USB and other interface forms

Cnc robot suitable for handling, palletizing, assembly, 3C and other application fields

6
EVS 4 Axis Universal SCARA Robot EVS3-400
No reviews yet.
Reach 400mm | Repeatability 0mm | Payload 1-3 kg

Scara robot with compact and flexible structure, fast running speed, high transmission accuracy and low noise

Robotic automation highly rigid arm design realizes high load and high speed in one package

Available in 600 to 1000mm arm span; 1kg to 20kg payload

Adapt to G3 control cabinet, provide 23 input and 23 output custom IO; support serial port, network, USB and other interface forms

Cnc robot suitable for handling, palletizing, assembly, 3C and other application fields

7
DENSO LPH-040
No reviews yet.
Reach 400-1000 mm | Repeatability 0mm | Payload 3-20 kg

High-performance, low-priced, compact and light weight SCARA Robot!

Total arm length|400mm
Maximum payload
|3kg
Position repeatability
|±0.02mm


EVP2 can be built into the controller

Easy Setting of Image Processing Operations without Programming
EVP2 is an image processing application specially developed for use with a “pick & place” robot.
This software offers enhanced functionality and several times greater processing power than the previous EVP application, while maintaining the same ease of operation.


Gripper Design with High Degree of Freedom

The maximum moment of inertia of the T-axis is large in order to provide a gripper design with a high degree of freedom.
* Also supports use in other configurations including in an overhanging position.


Reduction in Work Time without the Use of PLC

The robot and surrounding equipment can be controlled together according to the purpose through use of the high-performance controller RC8 function. This feature realizes a total cost down for equipment.


Enables Control from PLC with No Programming Knowledge Required

Utilizing the command-slave function provided as a free option enables the direct control of the robot from PLC through the Function Block (FB) feature that supports 130 types of robot commands that can be openly programmed from PLC.
This feature allows adjustments to be performed with only PLC knowledge without needing to create programs on the robot side, to realize a reduction in work time for initial adjustments at the start of use.




8
Janome Servo SCARA JS3 Series
No reviews yet.
Reach 350-550 mm | Repeatability 0mm | Payload 3-6 kg


Features

Make operation settings without writing a new robot language

Dedicated Pick & Place software prepared with all the command types you need. Just choose the robot movements from the menu.
Pre-programmed software shortens setup and teaching time.


Top Class High Speed Movement and Short Standard Cycle Time

Maximum Speed: 8,300mm/sec  Standard Cycle Time: 0.29sec
Enhanced high speed movement and continuous operability for increased productivity.

Cable and Tube Passage Inside the Robot Mechanism

Internal wiring and air tubing to minimize interference from peripheral devices and cables.


Expanded Pivot Axis Operating Range

The area behind the robot is accessible, eliminating wasteful extra movement and increasing robot installation flexibility.

Additional Robot Maintenance Functions

Use the robot's running data record as a guide for when to perform maintenance or replace consumable parts.

Comprehensive External Interfaces

LAN (Ethernet) port, USB memory port, 6 Field Network options, add up to 2 optional auxiliary axes.


Making Programs Is Easy

Use our original PC software or our teaching pendant.

Optional Teaching Pendant II

Our interactive input method makes direct teaching easy.

Optional "JR C-Points II" PC software

Large icons on the software screen make program creation easy.
Create, edit and save teaching data and customizing data.
We also offer a convenient point graphic editing function*.

①Programming Area
Directly input and edit program data.

②Basic Operation Area

Program just by choosing the icons you want.

③Robot Operations Area

Use the operation icons to make JOG movements.

Built-in Simple PLC Function

Handles simple communication with external devices; no need for an external PLC.

Multilingual Compatibility

Switch among 5 display languages with our PC software and 11 display languages on our teaching pendant.

9
Turin Robotic automation SCARA STH100
No reviews yet.
Reach 600-1000 mm | Repeatability 0mm | Payload 10kg

Specifications:

* Model: STH100

* Arm Reach: 600/800/1000 mm

* Payload: 10 Kg

*DOF: 4 Axis

*Body Weight: 45-50 Kg

*Repeat Accuracy: ± 0.02mm

*Working Temperature: 0-45°


Characteristics:

* Using SHIMPO imported reducer and domestic reducer mix-up configuration

* Servo motor standard configuration for domestic listed companies famous brand

INOVANCE

* Optional imported DuomoChuan servo motor and drive

* Imported tama - chuan servo motor and drive are optional

* Supports Japanese, Portuguese, Spanish, and English

* Can use computer to control the robot based on Ethernet TCP/IP

10
Epson T3-B All-in-One SCARA Robot
No reviews yet.
Reach 400mm | Repeatability 0mm | Payload 1-3 kg

Value without compromise. The ultimate slide alternative.

An innovative alternative to complex, slide-based systems, the improved T3-B All-in-One SCARA Robot installs in minutes and easily integrates into existing workflows, helping users save time and money. Designed to seamlessly fit in a variety of workspaces, this all-in-one solution features a built-in controller, power for end-of-arm tooling and 110 V or 220 V power—virtually eliminating any space-constraint issues. Plus, it offers a 400 mm reach and a payload of up to 3 kg to easily handle a variety of tasks.

The perfect choice for automation experts and novices alike, the T3-B makes it easy to create an array of solutions with two powerful development environments, Epson RC+® and Epson RC+ Express. Ideal for virtually any application, Epson RC+ redefines automation efficiency by offering a comprehensive suite of advanced tools and features in one convenient, integrated environment. Alternatively, all-new Epson RC+ Express helps coding newcomers get up and running quickly with an intuitive, no-code, visual-based robot teaching environment that easily handles simple applications.

Offering powerful features at an incredible value, the T3-B All-in-One SCARA Robot is an extraordinary value-without-compromise automation solution.