IDEC SE4D Series Specifications

No reviews yet.
Write a review!

Ranked Nr. 160 of 122 Safety Scanners

FIND SUPPLIER

See all 122 Safety Scanners

Conventional light curtains had dead zone where there are no beam axis at both ends. With SE4D the first beam axis placed right along the edges, detection can be performed along the entire area. Up to 3 sets (emitter/receiver) can be connected in series to cover L or U shaped configurations, or to guard both the front and back of a machine.
SE4D light curtain is equipped with a muting control function that causes a line to stop only when a person passes through the light curtain, but does not stop the line when an object passes through. The muting sensor and muting lamp can be directly connected to the light curtain. A special controller for muting is not required thus reducing cost.
Fixed blanking prevents the control output (OSSD1/2) from turning off when a specific beam is interrupted. This is used in applications where a specific beam is always interrupted. When the object is moved outside of the sensing area, the control output (OSSD1/2) turns off. Floating blanking function prevents the control output (OSSD1/2) from turning off when the number of beams interrupted is less than a preset number. The number that can be set is from 1 to 3 beams. This function enables sensing even when the position of the obstacles changes in the sensing area.

Optical Safety Device
  • Safety Light Curtain
  • Safety Scanner
Extra info Key Features: Category 4, PLe, SIL3 / Slim and rugged design / No dead zone / Cascade up to 3 light curtains w/no dead zone / Built-in Muting Functions / Built-in Fixed and Floating Blanking / Built-in EDM Functions / Fast and Unified 14ms response time / PNP/NPN Outputs in a single model / IP67 Protection / MTTFd (year): 100

SE4D Series Downloads

SE4 D Series
You need to register to download this file.

SE4D Series Alternatives

See all 216 Safety Scanners
BANNER Type 4 safety light curtain EZ-SCREEN LS SERIES
Scanning range 12m

5/5 (1)

BANNER's EZ-SCREEN LS light curtains are a reliable and easy-to-use safety device designed for machine safeguarding in challenging manufacturing and packaging environments. With three resolutions available, ranging from 14 mm to 40 mm, and a range of up to 12 m, these light curtains provide end-to-end sensing with no blind zones. The aluminum housing and metal end caps protect each emitter and receiver against impacts, while highly visible alignment indicators and intuitive diagnostics make setup and troubleshooting a breeze.The EZ-SCREEN LS system requires no PC software or DIP switches for quick and easy configuration. The dual scan technology ensures high immunity to EMI, RFI, ambient light, weld flash, and strobe light. The no blind zone design eliminates gaps in detection, while the system can cascade up to four systems of any length, resolution, and number of beams.These light curtains are certified to Type 4 per IEC 61946, Category 4 PLe per EN ISO13849.1, and SIL3/SILCL3 per IEC 61508/IEC 62061, exceeding OSHA/ANSI control reliability requirements. The EZ-SCREEN LS pair model numbers come with an LS receiver, LS emitter, end-cap bracket kit, and center-mount bracket kit, making them a reliable choice for a range of manufacturing and packaging applications.
Autonics Type 4 safety light curtain SFLA Series

5/5 (1)

The SFLA series safety light curtains are installed in potentially dangerous or hazardous areas to safeguard personnel from injury. The light curtains feature proven technology from Autonics area sensors and mapping sensors. The light curtains are built to meet internationally safety standards and regulations. Various detection models (finger/hand/hand-body detection) and safety functions are available for diverse applications. The dedicated software atLightCurtain allows real-time status monitoring user settings such as automatic muting/blanking area functions.
Autonics Safety light curtain BWC series
No reviews yet.
Cross-Beam Area Sensors The BWC cross-beam type area sensors utilize a 3-point cross-beam method detection to minimize non-detection area and provide reliable detection. 7 different configurations are available based on the number of optics, optical pitch, and detection area size. The sensors provide reliable detection even in areas with high ambient lighting, up to 100,000 lux. The series also features various user-friendly functions including installation mode function, mutual interference prevention function, and self-diagnosis functions.
Sick Mirror columns with protective field height mirror
No reviews yet.
Mirror columns from SICK are used in areas in which multi-sided protection of hazardous points, such as machining centers, is required. The right solution is to combine multiple light beam safety devices or safety light curtains with mirror columns to deflect the light beam. Several sides of a machine can be protected with just one pair of sensors, which reduces wiring effort significantly. It is easy to adjust the deflector mirrors, which are mounted in stable columns. Unimpeded access for feeding operations and tool and program changes is another advantage compared to a mechanical fence and results in higher productivity. At a glanceFree-standing mounting solutionCompact, rugged design and extremely high stabilitySimple mounting and adjustmentLarge reflector surface for efficient multi-sided protection via beam deflection and high availabilityMirror columns in various lengthsWith a continuous mirror for safety light curtains and for multiple light beam safety devices with any number of beams
Autonics Safety light curtain SFL Series
No reviews yet.
The SFL series safety light curtains are installed in potentially dangerous or hazardous areas to safeguard personnel from injury. The light curtains feature proven technology from Autonics area sensors and mapping sensors. The light curtains are built to meet internationally safety standards and regulations. Various detection models (finger/hand/hand-body detection) and safety functions are available for diverse applications.
Rockwell Automation 450L GuardShield POC Safety Light Curtains
No reviews yet.
Our Bulletin 450L GuardShield™ POC safety light curtains are unlike traditional safety light curtains, which are based on separate transmitter and receiver units. Patented technology allows each transceiver to be used as a transmitter or receiver via an innovative plug-in module. The 450L-B is the basic model with on/off functionality. The advanced 450L-E model features integrated laser alignment, cascading, and integrated muting. Connection over EtherNet/IP makes the 450L-E light curtain a smart safety device that enhances safety while providing connectivity through The Connected Enterprise®Includes patented technology that allows each transceiver to be used either as a transmitter or receiver via an innovative plug-in moduleFeatures an active protective field that senses over the entire length of a transceiverOffers a wide range of protection heights 150…1950 mm (5.9…76.7 in.) in increments of 150 mm (0.5 ft)Features a compact housing design 30 x 30 mm (1.18 x 1.18 in.)Provides easy configuration of the start mode, external device monitoring (EDM), and scanning range by DIP switches on the plug-in modulesProvides basic on/off functionality (450L-B only)Bulletin 450L-E Safety Light CurtainsOffers enhanced features including integrated laser alignment, longer operating range and options for cascading, blanking and integrated mutingFeatures integrated laser alignment for fast and reliable installationOffers built-in cascading and integrated muting capabilities Typical applications for the Bulletin 450L-B Safety Light Curtains include:Electronic fencesForming operationsRobot cellsPressesWorkstations
Rockwell Automation 450L GuardShield PAC Safety Light Curtains
No reviews yet.
Our 450L GuardShield™ PAC Safety Light Curtains help protect personnel from hazardous machinery. These light curtains are designed for whole-body detection and are typically positioned around an area or in front of a machine process entry or exit area that poses a moderate to high risk of operator injury. Our GuardShield safety light curtains are unlike traditional safety light curtains, which are based on separate transmitter and receiver units. Patented technology allows each transceiver to be used as a transmitter or receiver via an innovative plug-in module. Like the other advanced products in the 450L GuardShield line, the PAC versions also feature integrated laser alignment, cascading, blanking, and integrated muting. Features a compact design 30 mm x 30 mm (1.18 in. x 1.18 in.)Includes Integrated Laser Alignment System (ILAS), plug-in DIP switches and integrated muting option available for easy installation and configurationOffers innovative plug-in modules (available separately) which enable basic (ON/OFF)Provides cascading plug-ins for serial connection of safety light curtainsCovers a wide range of protection heights 150 mm, 600 mm, 900 mm or 1050 mm and available in 1-, 2-, 3-, or 4-beam models respectivelyOffers a versatile mounting options for enhanced application flexibility
Fiessler Type 4 safety light curtain ULVT
No reviews yet.
The safety light curtains ULVT consist of the two components: transmitter and receiver. The distance between both components and the overall height result in those protection width and - height. By the modular construction protection heights of 100mm to 1900mm are realizable. Special sizes are also available. If an object is in the protection field, i.e. it is darkened at least one of the beams, the two outputs of the receiver interrupt the dangerous movement of the machine, or prevent a start. A renewed start of the machine is in the operating mode with restart only possible by pressing the start push-button during a free protection field. Several LED at the receiver display thereby the respective operating condition. The system detects an internal or external error the machine is immediately switched off and the LED in the transmitter or in the receiver shows by flashing the error status.
Fiessler Type 2 safety light curtain TLVT series
No reviews yet.
The safety light curtains TLVT consist of the two components: transmitter and receiver. The distance between both components and the overall height result in those protection width and - height. By the modular construction protection heights of 100mm to 1900mm are realizable. Special sizes are also available. Transmitter and receivers operate synchronously, i.e. at the same point in time only a light beam and a reception item are active. The synchronisation is made by the first light beam and the first reception item. Between transmitter and receivers therefore no electrical connection is necessary. The transmitter creates infrared light beams, which are switched on and off rapidly successively. The parallel light beams with a distance from 7,5mm are controlled by two a chip micro controllers. A resolution of 14mm is realised by the beam distance. Synchronously to the light beams of the transmitter in the receiver all reception items are analysed by two a chip micro controllers. If an object is in the protection field, i.e. it is darkened at least one of the beams, the two outputs of the receiver interrupt the dangerous movement of the machine, or prevent a start. A renewed start of the machine is in the operating mode with restart only possible by pressing the start push-button during a free protection field. Several LED at the receiver display thereby the respective operating condition. The system detects an internal or external error the machine is immediately switched off and the LED in the transmitter or in the receiver shows by flashing the error status.
DATALOGIC SLS-B5
No reviews yet.
Safety Laser Sentinel, Area Scanner, SLS-B5 Base 5.5m 3 zone sets
BANNER Measuring light curtain TWO-PIECE MINI-ARRAY SERIES
No reviews yet.
The A-GAGE® MINI-ARRAY is a programmable measuring light screen system ideal for inspection, profiling, and object detection. Based on the popular MINI-ARRAY emitter and receiver design, this two-piece system is easy to use and installl and does not require a separate controller. - Simple two-piece measuring light screen for inspection, profiling, and object detection - Detects single-fault emitter, receiver and dirty lens conditions; continues to function in single-fault conditions - Diagnostic LEDs provide a simple means of monitoring sensor performance - Models available with array lengths from 150 to 1220 mm in 150 mm increments plus 1520 mm and 1830 mm models - Available in models with 9.5 or 19.1 mm beam spacing - 19.1 mm models optimized for vehicle separation applications - Two discrete outputs plus EIA-485 serial communication - System is configurable via the EIA-485 serial interface - Alarm output signals dirty lens and system fault conditions - EIA-485 serial communication enables a computer to process scan data and system status.
See all SE4D Series Alternatives