Onrobot Compute box Specifications

3.7/5 (1) Write a review!

Ranked Nr. 9 of 116 End of Arm Tools

FIND SUPPLIER

See all 116 End of Arm Tools

Designed to work with an OnRobot six-axis sensor for measuring forces and torques. Used to read and configure the sensor via Ethernet interface. The Compute Box must be powered via the Power Connector. Power-over-Ethernet (PoE) is not supported. Use provided power supply or similar unit (12V-24V).

The Compute Box provides the data received from the sensor to any device through the Ethernet interface. A cable is provided to connect the Compute Box to a PC or laptop.

Payload 0.0001 kg
Product mass 0.0001 kg

Compute box Alternatives

See all 173 End of Arm Tools
Hypersen HPS-FT060E
Product mass 0.255kg
No reviews yet.
Hypersen's HPS-FT060E is a high-performance force and torque sensor designed to measure forces and torques on three spatial axes of XYZ. It is equipped with a high-performance processor and 24-bit ADC, ensuring accurate and reliable data collection. The sensor has a high SNR digital output and provides a 2000Hz output data rate, which is suitable for high-speed applications. The device has a high static overload protection and can withstand forces and torques up to 350% of its maximum rated measurement range without damage.The HPS-FT060E has a low zero drift & cross-axis effect, and low temperature drift, which ensures the accuracy of the sensor over time. It is available with Ethernet, EtherCAT, Analog, and RS-485 communication, making it compatible with a variety of applications. The device is suitable for use in industrial robots, collaborative robots, factory automation, and more.The sensor has a measuring range of ±600N for the Fxy axis, ±800N for the Fz axis, and ±15Nm for the Mxy and Mz axes. The precision of the device is 0.2N for the Fxy axis, 0.4N for the Fz axis, and 0.002Nm for the Mxy and Mz axes. The device has an overload limit of 350% of its maximum rated measurement range for all axes of force and moment measurement. The HPS-FT060E has a protection class of IP65 and a hysteresis of 0.1% F.S. The non-linearity is less than 1.25%, and creep is less than 2%. The signal noise is 0.03N for the Fxy axis, 0.12N for the Fz axis, and 0.001N for the Mxy and Mz axes. The crosstalk is less than 2% F.S. for all axes of measurement. The sensor weighs 255g and has a size of 877828.5mm.
Grip MGW Connector
Payload 10-120 kg | Product mass 0-10.5 kg
No reviews yet.
The MGW Connector is our universal quick changer for every application and we have made it even better! The new system is of higher quality and offers more safety and accuracy. The innovations are a response to the current requirements of our customers. A centering disc can be installed on both the upper assembly (robot side) and lower assembly (tool side) of the robot and ensures that the tools are correctly aligned with the robot arm. MGW Connector advantages:Interface according to DIN EN ISO 9409-1Durable - 5,000/10,000 cycles*Withstands high loadsNo tool required due to integrated operating leverIntuitive operationCan be released and closed with one handProtection against unintentional opening for dynamic applicationsSpring-loaded locking pin secures hand lever against self-releasingLightweight made of high-strength aluminum, anodizedOptional mounting surface for energy feed-through*Cycles dependent upon the MGW material. By turning the semi cylindrical bolt by 180°, the upper assembly and lower assembly are secured together. When locking, the lower assembly is pulled up by the lever action. A centering disc can be installed on both the upper assembly (robot side) and lower assembly (tool side) of the robot and ensures that the tools are correctly aligned with the robot arm.
DESTACO MANUAL TOOL CHANGERS - TC1 SERIES
Payload 10kg | Product mass 0.33kg
No reviews yet.
DESTACO’s TC1 Series tool changers are ultralight, compact, and ideal for cobot work cells and applications requiring custom coupling solutions. Designed for safety, ease of use, durability, and excellent repeatability, this tool changer features a very low profile and a coupling solution with pneumatic and electrical pass-thru capability. The tool changer features IS0 9409 mounting, plus a highly adaptive blank version that is easily modified by machine builders for application specific needs.
KONSEI KHC Compact Auto Tool Changer
Payload 0.5kg | Product mass 0.067kg
No reviews yet.
The ultra-compact light-weight unit (60g) for parallel-motion robots. ■0.5kg payload limit ultra-compact auto tool changerThe ultra-compact light-weight unit (60g) for parallel-motion robots■Anti-drop mechanism for standard modelsBuilt-in spring retention for a sudden air loss■Various optionsIn addition to 2 built-in air ports for tool, maximum 2 air ports and maximum 6-signal electrode can be added
Grip SWA Connector
Payload 8-62 kg | Product mass 0-5 kg
No reviews yet.
The SWA Connector has a very low profile for applications with very little space. The transverse screw clamps the upper and lower assembly of the SWA with two wedge-shaped locking flanges, creating a form-fit without any play. SWA Connector advantages:Extremely low profileEasy to useLow weight, made of high-strength aluminum, anodizedAvailable in steel, optionally nitratedHigh repeatability < 0.02 mmDurable - 10,000 cyclesInterface according to DIN EN ISO 9409-1
ANUBIS 3D MTC-606 MANUAL TOOL CHANGERS (6 X 6MM)
Payload 25kg | Product mass 0.41kg
No reviews yet.
The MTC-606 is the smallest tool changer in our line up and consists of 6 through-ports sized for G1/4 fittings which can be used for either vacuum or pressure. Customized robot flange plates ranging from 20-55mm diameter patterns makes the MTC-606 ideal for all your cobot needs
Grip SHW Connector
Payload 12-68 kg | Product mass 0-4 kg
No reviews yet.
The SHW Connector is a manual tool changer with an optimized locking mechanism. The connector consists of a cylindrical bolt which locks the upper and lower assembly together. A centering disc can be installed on both the upper assembly (robot side) and lower assembly (tool side) of the robot and ensures that the tools are correctly aligned with the robot arm. SHW Connector Advantages:Interface according to DIN EN ISO 9409-1High repeatability < 0.02 mmDurable - 5,000 cyclesWithstands high loads with low dead weightToolless due to integrated operating leverImproved operating lever with pure folding movementIntuitive operation: can be released and closed with one handLightweight made of high-strength aluminum, anodizedIntegrated mounting surface for energy feed-throughLocking pin secures the hand lever against unintentional release
KOSMEK SWR Robotic Hand Changer
Payload 0.5-360 kg
No reviews yet.
High-precision Robotic Hand Changer with many features enables multiple functions of robots and setup time reduction. It enhances the productivity of automated production line. No Backlash at Connection (Repeatability：3μm), High Rigidity (Durable for Bending and Twisting)Long Operational Life (Durability of more than 1 million cycles)
Grip SWS Connector
Payload 14-200 kg | Product mass 0-23 kg
No reviews yet.
The SWS Connector is our power pack for applications with increased force and torque loads. The semi-cylindrical bolt accurately joins the upper and lower assembly without play. A centering disc can be installed on both the upper assembly (robot side) and lower assembly (tool side) of the robot and ensures that the tools are correctly aligned with the robot arm. SWS Connector advantages Operation with square socket keyOptional Safety-Lock. Prevents unintentional opening in dynamic applicationsSteel version, optionally nitratedOptional mounting surface for energy feed-throughWithstands high loadsCan be opened and closed with one handleHigh repeatability < 0.02 mmDurable - 10,000 cyclesWhen locking, the lower assembly is pulled up by the locking actionInterface according to DIN EN ISO 9409-1
Gifu 30# For Vertical Machining Centers
Product mass 3kg
No reviews yet.
High Speed Disc Type Tool Magazine with Nonimpact Arm and Simultaneous Linkage with Spindle on Tool Unloading Mechanism.
Gifu Compact Rotary Disc Tool Magazine
Product mass 8kg
No reviews yet.
Tool magazine drive source: Electric, Servo
See all Compute box Alternatives